Axis AXIS 211W Network Camera With Flexible Wireless Video Surveillance

→ Superior image quality
→ Simultaneous MPEG-4 and Motion JPEG
→ Flexible installation with wireless capability
→ Secure communication
→ Outdoor option
→ Image sensor: 1/4” Progressive scan RGB CMOS VGA
→ Lens: Varifocal 3.0 - 8.0 mm, F1.0, DC-iris, CS mount; Horizontal angle of view: 27° – 67°
→ Minimum illumination: 0.75 lux, F1.0
→ Shutter time: 1/15000 s to 1/4 s
→ Video compression: MPEG-4 Part 2 (ISO/IEC 14496-2); Motion JPEG
→ Resolutions: 640x480 to 160x120
→ Frame rate MPEG-4: Up to 30 fps in all resolutions
→ Frame rate Motion JPEG: Up to 30 fps in all resolutions
→ Video streaming: Simultaneous MPEG-4 and Motion JPEG; Controllable frame rate and bandwidth; VBR/CBR MPEG-4
→ Image settings: Compression, color, brightness, sharpness, contrast, white balance, exposure control, fine tuning of behavior at low light, rotation; Text and image overlay; Privacy mask
→ Audio streaming: Two-way
→ Audio compression: G.711 PCM 8 kHz; G.726 ADPCM; Configurable bit rate
→ Audio input/output: Built-in microphone, exte al microphone input or line input, line output
→ Wireless interface: IEEE 802.11g/b
→ Network security: WEP 64/128 bit, WPA/WPA2-PSK, WPA/WPA2-Enterprise (EAP-TLS, EAP-PEAP/MSCHAPv2); Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control
→ Supported protocols: IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, WPA-/WPA2-PSK, WPA-/WPA2-Enterprise, EAP-TLS, EAP-PEAP/MSCHAPv2, WEP
→ Application Programming Interface: Open API for software integration, including VAPIX® from Axis Communications available on the Axis website
→ Intelligent video: Video motion detection, audio detection
→ Alarm triggers: Intelligent video and exte al input
→ Alarm events: File upload via FTP, HTTP and email; Notification via email, HTTP and TCP; Exte al output activation; Pre- and post-alarm video buffering
→ Processors and memory: ARTPEC-A, 64 MB RAM, 8 MB Flash
→ Power: 7 – 20 V DC max. 5 W; Power over Ethe et IEEE 802.3af Class 2
→ Connectors: RJ-45 10BASE-T/100BASE-TX PoE, Auto-MDIX; Terminal block for 1 alarm input, 1 output and alte ative power connection; Reverse SMA for radio; 3.5 mm mic/line in, 3.5 mm line out
→ Operating conditions: 0 °C to 45 °C (32 °F to 113 °F); Humidity 20 – 80% RH (non-condensing)
→ Approvals: EN 301 489-1, EN 301 489-17, EN 300 328, FCC Part 15 Subpart B and C Class B, RSS-210, TELEC, AS/NZS 4711, MIC; Power supply: EN 60950-1, UL, cUL
→ Weight: 0.5 lb (240 g)
→ Included accessories: Power supply, stand, terminal connector kit, antenna, antenna connector lid, Installation Guide, CD with installation tools, recording software and User’s Manual, Windows decoder 1-user license