Axis AXIS 216FD-V Fixed Dome Network Camera With Vandal-resistant Casing

→ Discreet and compact design
→ Powerful event management
→ Image sensor: 1/4” Progressive scan RGB CMOS
→ Lens: Varifocal 2.8 – 10 mm, F1.3, DC-iris; Angle of view = 20° – 73° horizontal
→ Minimum illumination: 1 lux, F1.3
→ Shutter time: 1/15000 s to 1/4 s
→ Camera angle adjustment: Pan 360°, tilt 170°, rotation 340°
→ Video compression: MPEG-4 Part 2 (ISO/IEC 14496-2); Motion JPEG
→ Resolutions: 160x120 - 640x480
→ Frame rate MPEG-4: Up to 30 fps in VGA
→ Frame rate Motion JPEG: Up to 30 fps in VGA
→ Video streaming: Simultaneous MPEG-4 and Motion JPEG; Controllable frame rate and bandwidth; VBR/CBR MPEG-4
→ Image settings: Compression, color, brightness, sharpness, white balance, exposure control, rotation, fine tuning of behavior at low light; Text and image overlay; Privacy mask
→ Audio streaming: Two-way, half-duplex
→ Audio compression: AAC LC 8 kHz; G.711 PCM 8 kHz; G.726 ADPCM 8 kHz; Configurable bit rate
→ Audio input/output: Built-in microphone, exte al microphone input or line input, line level output
→ Network Security: Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, user access log
→ Supported protocols: IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
→ Application Programming Interface: Open API for software integration, including VAPIX® from Axis Communications available on the Axis website
→ Intelligent video: Video motion detection, active tampering alarm, audio detection
→ Alarm triggers: Intelligent video and exte al input
→ Alarm events: File upload via FTP, HTTP and email; Notification via email, HTTP and TCP; Exte al output activation
→ Video buffer: 9 MB pre- and post alarm
→ Casing: 2200 lb. (1000 kg) impact-resistant casing
→ Processors and memory: ARTPEC-A, 32MB RAM, 8MB Flash
→ Power: 4.9 – 5.1 V DC max 3.6 W; Power over Ethe et IEEE 802.3af Class 1
→ Connectors: RJ-45 10BASE-T/100BASE-TX PoE, DC jack; Terminal block for 1 alarm input and 1 output; 3.5 mm mic/line in, 3.5 mm line out
→ Operating conditions: 0 – 50 °C (32 – 122 °F); Humidity 20 – 80% RH (non-condensing)
→ Approvals: EN 55022 Class B, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class B, VCCI Class B, ICES-003 Class B, C-tick AS/NZS CISPR 22, EN 60950-1; Power supply = EN 60950-1, UL, CSA
→ Weight: 1.28 lb (580 g)
→ Included accessories: Power supply, mounting and connector kits, Installation Guide, CD with installation tools, recording software and User’s Manual, Windows decoder 1-user license