Axis AXIS P1344 1 MP/HDTV 720p, Day And Night Indoor Network Camera

→ Superb video quality
→ Multiple H.264 video streams
→ Digital PTZ
→ Indoor, day and night, 1 MP/HDTV 720p camera
→ Image sensor: Progressive scan RGB CMOS 1/4”
→ Lens: CS-mount lens; Varifocal 3-8 mm: 72° - 28° horizontal angle of view, F1.2, DC-iris
→ Day and night: Automatically removable infrared-cut filter
→ Minimum illumination: Color = 0.3 lux, B/W: 0.05 lux, F1.2
→ Shutter time: 1/24500 s to 1/6 s
→ Video compression: H.264 (MPEG-4 Part 10/AVC); Motion JPEG
→ Resolutions: 1280x800 [1440x900 (1.3 MP) scaled resolution available via VAPIX®] (1 MP) to 160x90
→ Frame rate H.264/Motion JPEG: 30 fps in all resolutions
→ Video streaming: Multiple, individually configurable streams in H.264 and Motion JPEG; Controllable frame rate and bandwidth; VBR/CBR H.264
→ Pan/Tilt/Zoom: Digital PTZ, preset positions, guard tour
→ Image settings: Compression, color, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, fine tuning of behavior at low light, rotation, mirroring of images, wide dynamic range - dynamic contrast; Text and image overlay, privacy mask; Corridor Format™
→ Audio streaming: Two-way
→ Audio compression: AAC LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz; Configurable bit rate
→ Audio input/output: Exte al microphone input or line input, line output; Built-in microphone
→ Network security: Password protection, IP address filtering, digest authentication, HTTPS encryption, IEEE 802.1X network access control, user access log
→ Supported protocols: IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
→ Application Programming Interface: Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications, available on the Axis website; ONVIF, specification available on the ONVIF website; AXIS Video Hosting System (AVHS) with One-Click Camera connection
→ Intelligent video: Video motion detection, active tampering alarm, audio detection, AXIS Camera Application Platform
→ Alarm triggers: Intelligent video, exte al input
→ Alarm events: File upload via FTP, HTTP and email; notification via email, HTTP and TCP; exte al output activation; video and audio recording to edge storage; pre- and post-alarm video buffering
→ Installation aids: Focus assistant, pixel counter, remote back focus
→ Casing: Camera = Metal (zinc); Color = white NCS S 1002-B
→ Processor and memory: ARTPEC-3, 128 MB RAM, 128 MB Flash
→ Power: 8-20 V DC or Power over Ethe et (PoE) IEEE 802.3af; max. 6.4 W, PoE Class 2
→ Connectors: RJ-45 10BASE-T/100BASE-TX PoE; 3.5 mm mic/line in, 3.5 mm line out; terminal blocks for power, 1 alarm input and 1 output
→ Edge storage: SD/SDHC memory card slot (card not included); Support for recording to network share (Network Attached Storage or file server) - available in firmware version 5.40 and up
→ Operating conditions: Humidity 20 - 80% RH (noncondensing); 0 °C to 50 °C (32 °F to 122 °F)
→ Approvals: EN 55022, EN 55024, EN 60950-1, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, VCCI Class B, C-tick AS/NZS CISPR 22, ICES-003 Class B; EN 61000-3-2, EN 61000-3-3
→ Weight: 1.3 lb. (0.6 kg)
→ Included accessories: Stand, connector kit, Installation Guide, CD with installation tools, recording software and User’s Manual, Windows decoder 1-user license