Axis AXIS Q1921 Indoor Thermal Network Camera For IP-Surveillance

→ Available in 10 mm and 19 mm models
→ Thermal imaging for IP-Surveillance
→ Lens alte atives for different applications
→ High-quality detection
→ Image sensor: Uncooled Micro bolometer 384x288 pixels
→ Detection range: Lens (TA lens) = 10 mm, F = 1.2, Horizontal angle of view = 55°, Human (1.8x0.5 m) = 200 m/220 yd., Vehicle (2.3x2.3 m) = 460 m/505 yd.; Lens (TA lens) = 19 mm, FF = 1.0, Horizontal angle of view = 29°, Human (1.8x0.5 m) = 380 m/415 yd., Vehicle (2.3x2.3 m) = 870 m/950 yd.; Calculated with Johnson’s criteria; The detection range varies in different weather conditions
→ Sensitivity: NETD < 100 mK
→ Video compression: H.264 (MPEG-4 Part 10/AVC); Motion JPEG
→ Resolutions: Sensor is 384x288. Image can be scaled up to 768x576 and to standard VGA resolutions
→ Standard frame rate: Up to 30 fps within EU, Norway, Switzerland, Canada, USA, Japan, Australia, New Zealand; Up to 8.3 fps in other countries (Frame rate above 9 fps may be subject to export control regulations)
→ Video streaming: At least 1 stream in H.264 and Motion JPEG (simultaneous, individually configured streams in max. resolution at 30 fps); Controllable frame rate and bandwidth. VBR/CBR H.264
→ Image settings: Compression, brightness, exposure control, rotation, mirroring of images, text and image overlay, privacy mask, multiple palettes
→ Audio streaming: Two-way, half duplex
→ Audio compression: AAC LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz; Configurable bit rate
→ Audio input/output: Built-in microphone, exte al microphone or line input, line output
→ Network security: Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log
→ Supported protocols: IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS. Wide range of PT heads supported (drivers available for download on the Axis w)ebsite
→ Application Programming Interface: Open API for software integration, including the ONVIF specification available on their website, as well as VAPIX® and AXIS Camera Application Platform from Axis Communications, specifications available on their website; Support for AXIS Video Hosting System (AVHS) with One-Click; Camera connection
→ Intelligent video: Video motion detection, active tampering alarm, audio detection. Support for AXIS Camera Application Platform enables installation of additional applications
→ Alarm triggers: Intelligent video and exte al input
→ Alarm events: File upload via FTP, HTTP and email; notification via email, HTTP and TCP; exte al output activation
→ Video buffer: 32 MB pre- and post alarm
→ Casing: Zinc chassis
→ Processor and memory: ARTPEC-3, 128 MB RAM, 128 MB Flash
→ Power: Power over Ethe et IEEE 802.3af Class 3 8-20 V DC/20-24 V AC; max 6 W, max 10 VA; Power supply not included
→ Connectors RJ-45 10BASE-T/100BASE-TX PoE, terminal block for power, terminal block for two configurable inputs/outputs; 3.5 mm mic/line in, 3.5 mm line out; RS-422/RS-485; Terminal block for heater
→ Local storage: SD/SDHC memory card slot (card is not included)
→ Operating conditions: -40 °C to 60 °C (-40 °F to 140 °F ) Humidity 20-80% RH (non-condensing)
→ Approvals: EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN50121-4, EN 61000-6-1, EN 61000-6-2, EN 60950-1, KC Class B, FCC Part 15 Subpart B Class B, VCCI Class B ITE; IEC TR 60721-4-3 3M4/-4-4 4M4 (shock/vibration); IEC 60529 IP66
→ Weight: 2.1 - 2.14 lb. (950 - 970 g)
→ Included accessories: Connector kit, Installation Guide, CD with User’s Manual, recording software, installation and management tools, Windows decoder 1-user license
→ Optional accessories: Wall bracket accessories, Pan/tilt motor; Lenses = 10 mm, 19 mm; AXIS Camera Station and video management software from; Axis’ Application Development Partners. For more information, visit the Axis website.