Bosch CAM-940CE Indoor Covert (PIR) Color Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Integrated pinhole CCD color camera with 3.4 lx light sensitivity
→ 420 TV lines of horizontal resolution
→ Motion Analyzer II processing
→ Intelligent camera control (camera can be left on or controlled by the PIR)
→ 12 m x 12 m (40 ft x 40 ft) PIR coverage
→ Dual relay outputs for alarm and VCR control
→ Includes video cable with BNC connector → PIR Signal Processing
→ Intelligent Camera Control
→ Input Voltage: 10 VDC to 14 VDC
→ Input Current (Standby): 35 mA at 12 VDC
→ Input Current (Alarm or Camera On): 150 mA at 12 VDC
→ Pick-up Device for CAM940CE: 8.467 mm (1/3 in.) color CCD, PAL standard
→ Pick-up Device for CAM940C: 8.467 mm (1/3 in.) color CCD, NTSC standard
→ Scanning System: 2:1 interlace
→ Output: 1 V p-p, 75 ohm
→ Minimum Illumination: 3.4 lx with pinhole lens
→ Relay and Timer: Form C normally-open (NC) and normally-closed (NC) contacts, 125 mA at 12 VDC. Timer adjusts from 15 seconds to 60 seconds.
The Bosch CAM 940CE provides passive infrared(PIR) signals and standard composite video signals. Each detector completely conceals one integrated CCD color camera, providing discreet and covert video for coverage areas. The color camera in the CAM940CE provides PAL video. The unit includes timers and relay outputs for alarm and VCR control. Selectable modes for either switcher or PIR control offer a lower current draw option
Motion Analyzer II uses multiple thresholds and timing windows to analyze timing, amplitude, duration and polarity of signals to make an alarm decision. Will not alarm on extreme levels of thermal and illumination disturbances caused by heaters and air conditioners, hot and cold drafts, sunlight, lightning, and moving headlights. Two sensitivity settings are provided. Intelligent Camera Control Form C contacts activate external devices such as VCRs or lights. When the PIR detects motion, the contacts follow a field-selectable timer. The timer adjusts from 15 seconds to 60 seconds and restarts each time the PIR detects motion. Installers can program the camera to operate continuously or to follow the timer.
Similar Models:
CAM-940E: Detector With Color CCD Camera
CAM-940EBW: Detector With Black And White CCD Camera
