Bosch VIP-10 Single-channel Video Encoder Or Decoder
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ MPEG-4 Compression
→ Dual Streaming, View at One Quality, Record at Another
→ Two-way Audio
→ Alarm Inputs and Relay Output
→ PTZ Control
→ Built-in Web Server
→ Multicast & Inte et Streaming
→ Video Standards: ISO/IEC 14496 (MPEG-4); JPEG
→ Video Data Rate: 9.6 kBit/s 4 MBit/s
→ Video Resolution: 720 x 576/480* (full D1: 7 fields/s**); 720 x 576* (4CIF: 7 fps**); 704 x 288 (2CIF: 14 fps**); 352 x 576/480* (half D1: 25/30 fields/s**); 352 x 288 (CIF: 25/30 fps**); 176 x 144 (QCIF: 25/30 fps**)
→ Overall Delay (IP): 100 ms
→ Audio Standards: G.711; 300 Hz - 3.4 kHz
→ Audio Data Rate: 80 kBit/s
→ Audio Sampl. Rate: 8 kHz
→ Network Protocols: RTP, Telnet, UDP, TCP, IP, HTTP, IGMP, ICMP, ARP, SNMP
→ Software Update: Flash ROM, remote programmable
→ Configuration: Via Web browser, built-in Web server
→ Video In (Transmitter): 1x analog composite: NTSC or PAL; BNC connector, 75 ohm switchable, 0.7-1.2 Vpp
→ Video Out (Receiver): 1x analog composite: NTSC or PAL; BNC connector, 75 ohm , 1 Vpp
→ Audio In: 1 clamp mono line in, 3 Vpp, ca. 50 kohm
→ Audio Out: 1 clamp mono line out, 2.5 Vpp, 60 mW, 8 ohm
→ Alarm In: 2x clamp (non-isolated closure contact type), max. activation resistance 10 ohm
→ Relay Out: 1x clamp, 30 Vpp, 1 A
→ COM Port: 1x RS232/422/485, 9-pin Sub-D
→ Ethe et: 10/100 Base-T, auto sensing, half/full duplex, RJ45
*) Supported from Firmware version 2.10 onwards
**) Depends on picture content
The Bosch VIP 10 features S-VHS quality MPEG-4 video at up to 30 fps and two-way audio over IP networks. Supporting PAL / NTSC and CCIR /EIA sources it is available in two models, either as an encoder or decoder. The video signal can be received and displayed with a standard web browser or VIDOS video management software. Using a decoder you can integrate point-to-point connections into your system to display video from any camera on your analog monitors.
The VIP10 provides dual streaming for viewing at one resolution and/or frame rate, and recording at another. This reduces disk storage costs and minimizes network traffic. The VIP-10 supports remote control of popular PTZ cameras, domes, and multiplexers. It includes sophisticated directional motion detection to conserve bandwidth and centralized storage. The VIP 10 is tiny enough to be embedded within a camera housing, or can be mounted near the camera, or centrally rack-mounted. The VIP10 is the perfect solution for any compact MPEG-4 application.
Similar Models:
VIP-1000: Single-channel Video Encoder Or Decoder
VIP-1000E-2976: Single-channel MPEG-2/4 Encoder
VIP-1000S-2975: Single-channel MPEG-2/4 Decoder
