Bosch X-1600 Modular High-performance Video Encoder
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Modular and expandable with hot-swappable video modules
→ Choice of modules, including high-performance H.264 encoders
→ Direct or network-attached iSCSI RAID
→ Intelligent video motion detection and camera tampering detection on encoder modules
→ ONVIF conformant
→ Electrical:
→ Input: 100 to 240 VAC, 47 to 63 Hz, 1.6 A
→ Output: 12 VDC, 5 A max
→ Mechanical:
→ Dimensions (H x W x D): 35 x 118 x 52 mm (without cable outlet) (1.4 x 4.7 x 2.1 in)
→ Weight: Approx. 0.4 kg (0.8 lb)
→ Connectors: IEC 320, Switchcraft 760
→ Environmental:
→ Operating temperature: 0 °C to 50 °C ( 32 °F to 122 °F)
→ Storage temperature: -40 °C to 85 °C (-40 °F to 185 °F)
→ Relative humidity: 10 to 95%, non-condensing
→ Ethe et: Triple port (2 front, 1 rear) 10/100/1000 Base‑T, auto sensing, half/full duplex, RJ45
→ SFP: 1 Gbps SFP (small form-factor pluggable) slot at front
→ Protocols: RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP, SNTP, SNMP (V1, MIB‑II), 802.1x, RSTP
The Bosch X 1600 is a modular, high-performance CCTV video encoder system. Each X1600 is a 4 x 4 unit that accommodates up to four hot-swappable modules, allowing modules to be added or exchanged at any time without interrupting transmission to the existing channels. Encoder modules, each with four analog audio/video inputs, can be mixed and matched within both base systems.
The X-1600 base system provides two 1 Gbps Ethernet ports on the front and an additional 1 Gbps Ethernet port on the rear. This provides a greater choice of network connectivity and allows for easier inside-rack cabling like, for example, direct connection to an iSCSI storage array. This base system also features a 1 Gbps small form-factor pluggable (SFP) slot on the front, for example, an optical transceiver to enable direct fiber connection to a remote network. For applications not benefiting from these advanced features the X 1600 base system is available that just provides two 1 Gbps Ethernet ports, one on the front and one on the rear. The X1600 H.264 main profile encoder modules (VIP‑X1600‑XFM4A/XFM4B) deliver real-time H.264 compressed video over IP, providing two independent streams per camera with full frame rate at best quality for different purposes, like one stream for live viewing with lowest delay while the second stream is optimized for requiring only little recording space. In addition they are equipped with a hardware-accelerator for VCA functions, bringing Intelligence-at-the-Edge to the next level.
A module version supporting Bilinx communication over coax cable is also available. The X-1600 MPEG‑4 encoder modules (VIPX1600M4S/M4SA) also support H.264 with the latest firmware, though with limited functionality. View the video on a PC using Boschs comprehensive video management system, with or without Boschs IntuiKey keyboard. Alternatively, use a Web browser. These high-performance, multi-channel devices with iSCSI Recording-at-the-Edge, offer top-of-the-line Video-over-IP performance for CCTV today. Designed for reliability, the VIP X 1600 features hot-swappable video modules, dual redundant power supply inputs, and redundant network ports. The Bosch VideoSDK provides the means to integrate the X1600 with other video management systems.
