Comnet CNFE2EOC 2 Ethernet Channels Over Either 2 Twisted Pair Or 2 Coaxial Cables Using VDSL2 (EoVDSL) Technology

→ Utilizes latest VDSL2 technology for fastest data rate transmission and greatest transmission distance
→ Ideal for multiple-channel Ethernet over VDSL applications where modem space may be limited
→ Supports transmission distances of up to 10,000 ft (3 km) over twisted copper
→ Up to 1500 ft (457 m) over coaxial cable
→ Symmetric line rates of over 91 Mbps
→ Automatically sets fastest possible data rate vs. cable quality and transmission distance
→ User-configurable:
→ Master/remote, forward error correction, asymmetrical/symmetrical data, and long-reach/short-reach selection
→ IEEE 802.3 Compliant. 10/100 BASE-T/TX Ethernet port with automatic MDI/MDI-X crossover
→ Screw Terminals for twisted copper circuits, or BNC connectors for coaxial cable
→ INTERFACE
→ Ethernet Port:
→ Ethernet connector: (2) RJ45
→ Cable: Cat 5, Cat 5e, Cat 6
→ Data Rate: 10/100Mbps
→ Distance: 100m (328ft)
→ Line Side Port 1 (Twisted Pair):
→ UTP connector: (2) Screw Terminal Block
→ Cable: Telephone-grade 19 to 26 AWG (one twisted pair)
→ Throughput: (Downstream / Upstream)
→ 1000 ft (305 m) 70 Mbps / 68 Mbps
→ 2500 ft (762 m) 26 Mbps / 17 Mbps
→ 5000 ft (1524 m) 16 Mbps / 1 Mbps
→ 7500 ft (2286 m) 5 Mbps / 0.5 Mbps
→ 10,000 ft (3048 m) 1 Mbps / 0.25 Mbps
→ Line Side Port 2 (75Ω Coax):
→ Coaxial connector: (2) BNC
→ Impedance: 75 ohm coax
→ Throughput: (Downstream / Upstream)
→ 200 ft (61 m) 88 Mbps / 95 Mbps
→ 500 ft (152 m) 85 Mbps / 93 Mbps
→ 1000 ft (305 m) 83 Mbps / 89 Mbps
→ 1500 ft (500 m) 76 Mbps / 83 Mbps
→ Faster data rates/greater transmission distances thru coaxial cable are possible, depending upon the type and quality of the coaxial cable utilized
→ USER-CONFIGURABLE SELECTION OF:
→ Master/Remote Operation
→ Symmetrical/Asymmetrical Data
→ Forward Error Correction
→ Long or Short Range operation for optimal BER (Bit Error Rate) performance
→ ELECTRICAL & MECHANICAL
→ Power:
→ Stand Alone: 12–27 VAC @ < 320 mA or
→ 12–27 VDC @ < 320 mA
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Overload Protection: Automatic Resettable
→ Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ SIZE (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lbs./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: 0° C to 60° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to humidity with condensation conditions by adding suffix '-C'
→ Voltage transient protection on all power and signal input/output lines
→ Provides protection from power surges and other voltage transient events.
→ Plug-in Power Supply (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adapter Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ May be utilized as a stand-alone package, or may be mounted within the ComNet C1 Card Cage
→ Fully hot-swappable
→ Five year warranty