Comnet CNFE2MCPOE 10/100 Mbps Ethernet 2 Port Media Converter
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Designed to meet full compliance with the environmental
→ Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
→ No in-field optical adjustments required
→ LED Indicators
→ IEEE 802.3 compliant
→ DATA
→ Data Interface: Ethernet
→ Data Rate: 10/100 Mbps
→ IEEE 802.3 Compliant
→ Full Duplex or Half Duplex Electrical
→ Port/Full Duplex Optical Port
→ FIBERS SFP Dependent
→ FIBER CONNECTORS Requires selection of sold-separately
→ SFP modules. See ComNet data sheet
→ for number and description of SFP
→ modules
→ CONNECTORS
→ Power: Terminal Block
→ Electrical: RJ45
→ PoE pin assignment RJ45 port #1 supports IEEE802.3at
→ End-point Positive (VCC+): RJ45 pin 1, 2
→ Negative (VCC-): RJ45 pin 3, 6
→ Data (1, 2, 3, 6)
→ Max. PoE current 600mA continuous
→ LED INDICATORS - Optical Link/Data Activity
→ Power - PSE
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 12VDC@3A, 24VDC@1.5A
→ Current Protection: Automatic Resettable
→ Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH)
→ Standard Size 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lbs./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40˚ C to +75˚ C @ 15W
→ -40°C to 50°C @ 30W
→ Storage Temp: -40˚ C to +85˚ C
→ Relative Humidity: 0% to 95% (non-condensing)
→ Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode
→ fiber needs to meet or exceed fiber standard ITU-T G.652
→ May be extended to condensation conditions
→ 24 Volt DC 2 Amp Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add suffix '-C'for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ Lifetime Warranty
The ComNetTM CNFE2MCPOE Ethernet 2 port media converter is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP modules. These models require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE2MCPOE transmits and receives a single channel of Ethernet data. It also supports IEEE 802.3at as Power Sourcing Equipment (PSE) with up to 25 Watts @ 48VDC. The electrical interface, will Auto-Negotiate to a 10 Mbps or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally hardened to operate in extreme conditions. LED indicators are provided for confirming equipment operating status.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
