Comnet CNGE3FE7MS2 Environmentally Hardened Managed Ethernet Switch
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Extended ambient operating temperature range:
→ -40˚ C to +75˚ C
→ 10/100 BASE-TX and 100/1000 BASE-FX compatible
→ Flexible optics configuration via SFP plug-in modules
→ DIN rail or wall mountable mounted
→ Redundant power supply compatibility reduces possibility
→ of single-point-of-failure for highest possible reliability
→ Fully configurable through web-based or SNMP network management
→ IGMP Snooping V1/V2 for multicast filtering and IGMP Query V1/V2
→ Port based VLAN (IEEE 802.1Q)
→ Rapid Spanning Tree protocol (IEEE 802.1W) Switch
→ Architecture Back-plane (Switching Fabric): 7.4Gbps
→ Packet throughput ability (Full Duplex):
→ 11 Mpps @64bytes
→ Transfer Rate 14,880pps for Ethernet port
→ 148,800pps for Fast Ethernet port
→ 1,488,000pps for Gigabit Fiber Ethernet port
→ Packet Buffer 1Mbits
→ Mac Address 8K MAC address table
→ Flash ROM 4Mbytes
→ DRAM 32Mbytes
→ Connector1 10/100TX: 7 x RJ45
→ 10/100/1000T/Mini-GBIC Combo:
→ 3 x RJ45 + 3 x 100/1000 SFP sockets
→ RS232 connector: RJ45 type
→ DI/DO 2 Digital Input (DI):
→ Level 0: -30–2V
→ Level 1: 10–30V
→ Max. input current 8mA
→ 2 Digital Output (DO):
→ Open collector to 40 VDC, 200mA
→ Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5
→ cable. EIA/TIA-568 100-ohm (100m)
→ 100Base-TX: 2-pair UTP/STP Cat. 5/5E cable. EIA/TIA-568 100-ohm (100m)
→ 1000Base-TX: 2-pair UTP/STP Cat. 5e
→ or 6 cable. EIA/TIA-568 100-ohm (100m)
→ Optical Fiber1 Multimode: 50/125μm 62.5/125μm
→ Single Mode: 9/125μm
→ Requires selection of sold-separately SFP Modules
→ See ComNet data sheet "SFP Small Form-Factor Pluggable Modules" for number and description of SFP modules.
→ Protocol CSMA/CD
→ LED 10/100TX: Link/Activity (Green)
→ Full Duplex/Collision (Yellow)
→ Giga Copper: Link/Activity (Green)
→ Speed: 1000Mbps (Green)
→ SFP: Link/Activity (Green)
→ Power (Green), Power 1 (Green),
→ Power 2 (Green), Fault (Red),
→ Master (Green)
→ Reserve Polarity
→ Protection Present
→ Overload Current
→ Protection Present
→ Power Supply 12 48VDC, Redundant power with polarity reverse protect function and removable terminal block
→ Power Consumption 10.2 Watts
→ MTBF >100,000 hours
→ Operating Humidity 5% to 95% (Non-condensing)
→ Operating Temperature -40˚C to 75˚C
→ Storage Temperature -40˚C – 85˚C
→ Case Dimensions Metal case. IP-30,
→ 72mm (W) x 105mm (D) x 152mm (H)
→ 2.84" (W) x 4.13" (D) x 5.98" (H)
→ Installation DIN Rail and Wall Mount Design
→ EMI FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN61000-4-4 (EFT),CE EN61000-4-5 (Surge),
→ CE EN55022,CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4 IETF
→ RFC Compliance RFC768-UDP, RFC783-TFTP, RFC791-IP RFC792-ICMP, RFC793-TCP, RFC1519-CIDR,
→ RFC827-ARP, RFC854-Telnet, RFC894-IP over Ethernet,RFC1112-IGMP v1, RFC1541-DHCP (client),
→ RFC2030-SNTP, RFC2068-HTTP, RFC2236-IGMP v2, RFC2475-Differentiated Services, RFC2865-Radius,
→ RFC3414-SNMPv3-USM, RFC3415-SNMPv3-VACM IETF SNMP MIBS RFC1493-BRIDGE-MIB, RFC1907-SNMPv2-MIB,
→ RFC2013-UDP-MIB, RFC2578-SNMPv2-SMI, RFC2579-SNMPv2-TC, RFC2819-RMON-MIB, RFC2863-IF-MIB,
→ draftietf-bridge-rstppmib-03-BRIDGE-MIB, RFC2012-TCP-MIB, draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB,
→ IANAifType-MIB Safety UL, cUL, CE/EN60950-1, UL 508 Class 1, Division 2
→ Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
→ Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
→ Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
→ 24VDC Plug in Power Supply (12VDC in some regions), 90-264VAC, 50/60Hz (Included)
→ PS24-1A – 24VDC DIN Rail Power supply (sold separately)
→ Lifetime Warranty
The ComNetTM CNGE3FE7MS2 Managed Ethernet Switch provides robust transmission of (7) 10/100 BASE-TX and (3) 10/100/1000TX or 100/1000FX combo ports, of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally hardened units are designed for direct deployment in difficult out-of-plant or roadside operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media. Diverse media selection allows for easy implementation of point-to-point, linear add-drop, drop-and-repeat, star, or true self-healing ring and mesh network system architectures. The 7 electrical ports support the 10/100 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation. 3 ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP modules. These network managed layer 2 switchs are optically (100/1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever required. The CNGE3FE7MS2 incorporates LED indicators for monitoring the operating status of the managed switch and network. These units are DIN-rail or wall mountable.
Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside Installations - Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications.
