Comnet CNGE4US SERIES 10/100/1000 Mbps 4 Port Ethernet Unmanaged Switch

→ 10/100/1000 Mbps Ethernet
→ All ports support 1000 Mbps full duplex data
→ Automatic MDI/MDIX crossover
→ No infield Optical adjustments required
→ power and port status LED Indicators
→ IEEE 802.3 compliant
→ Hot swappable rack modules
→ Interchangeable between standalone or rack mount use ComFit
→ DATA
→ Data Interface: Ethernet
→ Data Rate: 10/100/1000 Mbps,
→ IEEE 802.3 Compliant
→ Full Duplex or Half Duplex Electrical
→ Ports/Full Duplex Optical Port
→ Operating Mode: SFP Selectable
→ FIBER CONNECTORS* Requires selection of sold-separately
→ SFP modules. See ComNet data sheet
→ SFP Small Form-Factor Pluggable Modules" for number and description of SFP modules
→ CONNECTORS
→ Power: Terminal Block
→ Optical: LC or SC (depending on SFP module used)
→ LED INDICATORS - Optical Link/Data Activity
→ Electrical Link/Data Activity
→ power
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-24 VDC @ 700 mA
→ Rack Mount: From Rack
→ Number of Rack Slots:
→ CNGE4US 1
→ Current Protection: Automatic Resettable
→ Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lbs./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode
→ fiber needs to meet or exceed fiber standard ITU-T G.652
→ May be extended to condensation conditions
→ 12 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add suffix '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ Small Form-Factor Pluggable Modules (See SFP data sheet)
→ DIN-Rail Mounting Adapter Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty