Comnet FDX57 SERIES Self Healing Ring: RS232/422/485 (2W/4W), Universal Data Transceiver

→ Meets EIA RS232 and RS422/RS485 (2 or 4-wire) specifications (Simplex or Duplex Operation)
→ Two Data Channel Capability: One full duplex or two half duplex channels
→ Only one optical fiber required between units for Fault
→ Tolerant/Self-Healing Ring Operation
→ Full data re-clocking and regeneration: no limit to the number of transceiver units used within the network
→ Supports supervised multiple master architecture for unparalleled network reliability
→ Remote Fault Indication allows the user to determine when a fiber break or loss of prime operating power has occurred, or a transceiver in the field has failed
→ LED status indicators provide rapid indication of all critical operating parameters, including the location of fiber breaks or failed transceivers
→ May be used to provide serial data protocol conversion between nodes (consult factory)
→ Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments
→ NTCIP compatible
→ Wide optical dynamic range: optical attenuators are never required
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount, ComFit package
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ DATA
→ Data Format: RS232, RS422, 2 or 4-wire RS485
→ w/Tri-State, Manchester, bi-phase
→ Data Rate: DC-250 k baud, max
→ Operating Mode: Asynchronous, simplex or full-duplex
→ Bit Error Rate: <10-12 @ Maximum Optical Loss Budget
→ WAVELENGTH
→ FDX57M1 and FDX57S1 1310/1550 nm
→ FIBERS 1 In/1 Out
→ OPTICAL EMITTER Laser
→ LED STATUS INDICATORS
→ 1. Power 2. Status 3. Receive Data Active 4. Transmit Data Active
→ 5. Port A Fiber Link Status 6. Port B Fiber Link Status
→ RING FAILURE RELAY
→ Normally closed contact: Solid-State relay contacts rated at 0.5 mA, resistive load.
→ CONNECTORS
→ Power: Terminal Plug
→ Data: Terminal Plug
→ Optical: ST
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 4 W
→ Rack: From Power Supply Integral to Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lbs./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating
→ Lifetime Warranty