Comnet FVT/FVR1001(M)(S)1 10-bit Digital Video

→ 10-bit Digital Video Transmission
→ Compatible with all NTSC, PAL, or SECAM
→ CCTV camera systems
→ Full Color Compatibility
→ Exceeds RS-250C Short-Haul quality
→ No In-field electrical or optical adjustments
→ Bi-color (Red/Green) LED status indicators provide
→ Rapid indication of critical operating parameters
→ Integrated WDM for greater product reliability
→ Distances up to 69 km (43 miles) without repeaters
→ Hot-Swappable Modules
→ Automatic resettable fuses on all power lines
→ Video:
→ Video Input: 1V pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz - 10 MHz
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): >67 dB @ Maximum Optical Loss
→ Budget
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ WAVELENGTH 1310 nm, Multimode and Single Mode
→ NUMBER OF FIBERS 1
→ LED INDICATORS - Optical - Video - Power
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 2 W
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in.,
→ (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix "-C" to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Lifetime Warranty
→ DIN-Rail Mounting Adapter Plate Kit – With mounting hardware (Optional, order model DINBKT1)