Comnet FVT/FVR1010(M)(S)1SHR Self Healing Ring: Digital Video With Up-the-Coax Data
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Daisy chain 8 video links on one single mode or multimode fiber
→ Dual optical port Self-Healing Ring (SHR) configuration
→ Exceeds all requirements for RS-250C medium haul transmission
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Distances up to 30 miles (48 km)
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Requires an additional FDC8T/R232 unit sold separately.
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz 6.5 MHz
→ Differential Gain: <2%
→ Differential Phase: < 0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
→ Max. RG-59 COAx Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth
→ DATA
→ Data Interface: RS232, RS422 and RS485 (2W/4W)
→ Data Format: NRZ, NRZI, Manchester, Bi-phase and Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ WAVELENGTH 1310/1550 nm, MM and SM
→ NUMBER OF FIBERS 1 in/1 out
→ OPTICAL EMITTER Laser Diode
→ LED INDICATORS Fiber Status Video Sync Presence
→ Received Data Transmitted Data
→ Power
→ CONNECTORS
→ Optical: 2 ST connectors for the Dual Port configuration (Required for Daisy Chain Self-Healing Ring operation)
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ Data: Terminal Block
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 3W
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty
The ComNetTM FVT/FVR1010SHR series of optical video links provides 10-bit digital video, 6.5 MHz bandwidth, medium haul video quality, one bi-directional data channel and a "Dual Optical Port" (DOP) Self-Healing Ring (SHR) topology. Up to (8) video transmitters and multiple video receivers can be "Daisy Chained" on one optical fiber. The Self-Healing Ring (SHR) topology using the Dual Optical Ports (DOP) provide fail safe operation in the event of loss of one fiber or one optical module. Each optical port uses wavelength division multiplexing (WDM) to both transmit and receive on one optical fiber. The data channel supports RS232, RS422, 2 wire and 4 wire RS485. The Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.
The FVTFVR1010MS1SHR is tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. This model features Voltage transient protection on all power and signal input/output lines, which provides unconditional protection from power surges and other voltage transient events.
Similar Models:
FVT1010M1SHR: Video Transmitter/Data Transceiver, Audio Transmitter (1310/1550 nm), Multimode 62.5/125μm, 16 dB, 2 km (1.2 miles), Rack Slots 1
FVR1010M1SHR: Video Receiver/Data Transceiver, Audio Receiver (1550/1310 nm), Multimode 62.5/125μm , 16 dB, 2 km (1.2 miles), Rack Slots 1
FVT1010S1SHR: Video Transmitter/Data Transceiver, Audio Transmitter (1310/1550 nm), Single Mode 9/125μm, 16 dB, 48 km (30 miles), Rack Slots 1
FVR1010S1SHR: Video Receiver/Data Transceiver, Audio Receiver (1550/1310 nm), Single Mode 9/125μm, 16 dB, 48 km (30 miles), Rack Slots 1
