Comnet FVT/FVR10D1A2C1(M)(S)1 10-bit Digitally Encoded Short-haul Video + Bi-directional Data + (2) Bi-directional Audio + Bi-directional Contact Closure

→ 10-bit digital video transmission:
→ Transmits 1 real-time color video signal and 1 bi-directional data signal on one optical fiber
→ Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
→ Two bi-directional Audio Channels
→ One bi-directional Contact Closure
→ 24-Bit 96 kHz Digitally Encoded Transmission
→ 20Hz – 18 kHz Audio Bandwidth
→ 600 Ohms Audio Input Impedance
→ Transmits Balanced Line-Level Audio up to +6dBm
→ Exceeds all requirements for EIA RS-250C short-haul transmission:
→ Extremely high video performance, Exceptionally low video distortion with zero
→ Performance Variation vs. Optical Path Loss
→ Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Robust design ensures extremely high reliability in unconditioned out-of-plant environments
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Input/Output Channels: 1
→ Bandwidth (minimum): 10 Hz 6.5 MHz per channel
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB Typical
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ DATA
→ Data Channels: 1
→ Data Interface: RS232, RS422 and RS485 (2W/4W),
→ UTC (Up-the-Coax)
→ Data Format: NRZ, NRZI Manchester, Bi-phase and
→ Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ Bit Error Rate: <1 in 10-9 @ Maximum
→ Optical Loss Budget
→ Operating Mode: Simplex or Full-Duplex
→ AUDIO
→ Input/Output Channels: 2 (balanced)
→ Audio Input/Output Signal: Max 4.4 volt pk-pk (+6dBm)
→ Bandwidth: 20Hz 18 kHz
→ Total Harmonic Distortion: 0.02%
→ Signal-to-Noise Ratio (SNR): 85dB (Typical)
→ CONTACT
→ Contact Interface: Response Time: 0.5 msec
→ Input: Dry Contact Closure
→ Output: SPST Relay, 0.5 A Contact Rating normally open
→ WAVELENGTH 1310/1550 nm, Multimode and Single Mode
→ NUMBER OF FIBERS 1
→ LED INDICATORS
→ Video Sync Presence Received Data, Transmitted Data, Link, Audio Channels 1-2, Contact Closure, Power
→ OPTICAL EMITTER Laser Diode
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Video: BNC
→ Data: Terminal Block
→ Audio: Terminal Block
→ Alarm: Terminal Block
→ Contact: Terminal Block
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 4W
→ Rack Mount: From Rack
→ Number of Rack Slots: 2
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in.-Cm) (LxWxH) 6.1 x 5.3 x 2.2 in., (15.5 x 13.5 x 5.6 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ Lifetime Warranty