Comnet FVT/FVR10D1E(M)(S) Digitally Encoded (10-Bit) Video, Bi-Directional Data And 10/100Mbps Ethernet Data

→ 10-bit digital video transmission
→ One bi-directional data channel
→ One 10/100 BASE-T/TX fast Ethernet port
→ IEEE 802.3 compliant
→ Automatic MDI/MDI-X crossover
→ Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines
→ Distances up to 30 miles (48 km)
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz 10 MHz
→ Differential Gain: <2%
→ Differential Phase: <0.7˚
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
→ maintain 6Mhz Bandwidth
→ DATA
→ Data Interface: RS232, RS422 and RS485 (2W/4W), UTC (Up-the-
→ Coax)
→ Data Format: NRZ, NRZI Manchester, Bi-phase and Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ ETHERNET
→ Data Interface: 10/100 BASE-T/TX
→ Data Rate: 10/100 Mbps
→ Full Duplex
→ WAVELENGTH 1310/1550 nm, MM and SM
→ NUMBER OF FIBERS 1
→ OPTICAL EMITTER Laser Diode
→ LED INDICATORS Link Video Data Ethernet Activity
→ CONNECTORS
→ Optical: 1 ST connector
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ Data: RJ45
→ Small-Size Data: Terminal Block
→ Ethernet: RJ45
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 350 mA
→ Current Protection: Automatic Resettable
→ Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) Mini 4.1 x 3.7 x 1.1 in.,
→ (10.4 x 9.4 x 2.8 cm)
→ Size (in./cm) (LxWxH) Full Size 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40˚ C to +75˚ C
→ Storage Temp: -40˚ C to +85˚ C
→ Relative Humidity: 0% to 95% (non-condensing)
→ FVT/FVR10D1E(M)(S) is a hot-swappable rack module
→ FVT/FVR10D1E(M)(S) is interchangeable between standalone or rack mount, use ComFit
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adapter Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty