Comnet FVT/FVR15M2 Video + Reverse Data (Cost Effective)

→ AM Video Transmission
→ NTSC, PAL, or SECAM compatible, Full Color Compatibility, NTCIP Compatible
→ Supports RS232 or RS422 Data interfaces
→ Transparent to data encoding/compatible with major
→ CCTV camera manufacturers
→ No In-field electrical or optical adjustments
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Automatic resettable fuses on all power lines
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Bandwidth: 5 Hz 10 MHz
→ Differential Gain: <5%
→ Differential Phase: <5°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB ATTN.
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ DATA
→ Data Format: RS232, RS422, Manchester, biphase
→ Data Rate: DC-115 Kbps (NRZ)
→ WAVELENGTH 850 nm
→ NUMBER OF FIBERS
→ FVT/FVR15M2 2
→ LED INDICATORS Video Present
→ Transmit Data
→ Receive Data
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Data: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 250 mA
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Heat Generation: 10 BTU
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty