Comnet FVT/FVR2014(M)(S)1 2-Channel Digitally Encoded Video With 4 Bi-Directional Data Channels Multiplexer

→ 10-bit digital video transmission
→ Transmits 2 real-time color video signals and 4 bi-directional data signals on one optical fiber
→ Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
→ Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
→ Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
→ Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Robust design ensures extremely high reliability in unconditioned out-of-plant environments
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Hot-swappable rack modules Interchangeable between stand-alone or rack mount use ComFit
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Input/output Channels: 2
→ Bandwidth (minimum): 10 Hz 6.5 MHz per channel
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB Typical
→ Max. RG-59 COAx Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6 MHz Bandwidth
→ DATA
→ Data Channels: 4
→ Data Interface: RS232, RS422 and RS485 (2W/4W)
→ Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ Bit Error Rate: <1 in 10-9 @ Maximum
→ Optical Loss Budget
→ Operating Mode: Simplex or Full-Duplex
→ WAVELENGTH 1310/1550 nm, Multimode and Single Mode
→ NUMBER OF FIBERS 1
→ LED INDICATORS Video Sync Presence for Each Video Channel
→ Received Data Transmitted Data Link
→ OPTICAL EMITTER Laser Diode
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 4W
→ Rack Mount: From Rack
→ Number of Rack Slots: 2
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 2.2 in., (15.5 x 13.5 x 5.6 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ (5) RJ45 RJ45 Breakout Wiring Kit (Includes cable and terminal block)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty