Comnet FVR22 Dual Video Receiver, Automatic Gain Control, Multimode

→ AM Video Receiver
→ NTSC, PAL, SECAM compatible
→ Full range Automatic Gain Control (AGC)
→ Two independent receivers in one model
→ Full color compatibility
→ Can be used to double the fixed video capacity of a C1 card cage
→ Plug-and-Play design for ease of installation
→ No in-field electrical or optical adjustments required
→ Bi-Color (Red/Green) indicating LED to monitor system performance
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Automatic resettable fuses on all power lines
→ Lifetime Warranty
→ Video:
→ Video Output: 1 volt pk-pk (75 ohms)
→ Bandwidth: 5 Hz - 10 MHz
→ Differential Gain: <5%
→ Differential Phase: <5˚
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 60 dB typical
→ 54 dB minimum
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6 MHz Bandwidth
→ Loss of Video Relay
→ Response Time: 0.5 msec
→ Inputs: Dry Contact Closure
→ Outputs: SPST Relay, 0.5A Contact Rating, Normally
→ Closed
→ Wavelength
→ FVR22 850 nm, Multimode
→ Number of Fibers 2
→ Connectors
→ Optical: ST
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ LED Indicators - Video Presence for Each Channel
→ Electrical & Mechanical
→ Power:
→ Surface Mount: 8-15 VDC @ 130 mA
→ Rack: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable Solid-State Current
→ Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH)
→ Surface Mount: 6.1 x 5.3 x 1.1 in (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ Environmental
→ MTBF: >100,000 hours
→ Operating Temp: -40˚ C to +75˚ C
→ Storage Temp: -40˚ C to +85˚ C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix "-C" to model number for conformal coating.
→ Lifetime Warranty