
Comnet FVT/FVR320(M)(S)1 32-Channel Digitally Encoded Video Multiplexer
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Transmits 32 real-time/full frame color video signals
→ Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
→ Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Robust design ensures extremely high reliability in unconditioned out-of-plant environments
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Input/output Channels: 32
→ Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB Typical
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
→ WAVELENGTH Single Mode 9/125μm
→ NUMBER OF FIBERS 1
→ LED INDICATORS - Video Sync Presence for Each Video Channel
→ - Optical Carrier Detect - Power
→ OPTICAL EMITTER Laser Diode
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ ELECTRICAL & MECHANICAL
→ Power:
→ Input Voltage: 90-264 VAC @ 70 W Maximum
→ Output Voltage: 9 VDC +/- 5% @ 6.5 Amps @ 75°C
→ FUSING 1.25 A slow blow (rack power supply)
→ (plug-in modules individually electronically fused)
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 19 x 7.5 x 6 in., (48 x 19 x 15 cm)
→ Shipping Weight: <8 lbs./3.6 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ Lifetime Warranty
The ComNetTM FVT/FVR320 series video transmitter and video receiver utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of 32 independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.
The FVT/FVR320 features a Plug-and-play design, which ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
Similar Models:
FVT320S1: Video Transmitter, Single Mode 9/125μm, 1 18 dB 54 km (35 miles)
FVR320S1: Video Receiver, Single Mode 9/125μm, 1 18 dB 54 km (35 miles)










