Comnet FVT/FVR4014(M)(S)1SHR Self Healing Ring: 4-Channel 10-bit Digital Video With 4 Bi-Directional Data Channels

→ Up to four 10-bit digitally encoded video channels
→ Four bi-directional data channels; or 8 – 32 contact closures
→ Daisy chain 8 video links on one single mode fiber
→ Dual optical port Self-Healing Ring (SHR) configuration
→ Exceeds all requirements for RS-250C medium haul transmission
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Distances up to 30 miles (48 km)
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Requires an additional FDC8T/R232 unit(s) sold separately.
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz 6.5 MHz
→ Differential Gain: <2%
→ Differential Phase: < 0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
→ Max. RG-59 COAx Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6Mhz Bandwidth
→ DATA
→ Data Interface: RS232, RS422 and RS485 (2W/4W)
→ Data Format: NRZ, NRZI, Manchester, Bi-phase and Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ WAVELENGTH 1310/1550 nm, MM and SM
→ NUMBER OF FIBERS 1 In/1 Out
→ OPTICAL EMITTER Laser Diode
→ LED INDICATORS Fiber Status
→ Video Sync Presence
→ Received Data
→ Transmitted Data
→ Power
→ CONNECTORS
→ Optical: 2 ST connectors for the Dual Port configuration (Required for Daisy Chain Self-Healing Ring operation)
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ Data: RJ45
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 3W
→ Rack Mount: From Rack
→ Number of Rack Slots: 3
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 3.3 in., (15.5 x 13.5 x 8.3 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ (5) RJ45 RJ45 Breakout Wiring Kit (Includes cable and terminal block)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty