Comnet FVT/FVR80D8SFP 8-Channel Digitally Encoded (10-bit) Video With 8 Bi-directional Data Channels Using Small Form-Factor Pluggable (SFP) Optical Devices
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ 8 Bi-directional data channels
→ Uses interchangeable SFPs for fiber type, distance and connector
→ Exceeds all requirements for RS-250C short-haul transmission
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz - 6.5 MHz
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
→ Max. RG-59 COAx Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6 MHz Bandwidth
→ DATA
→ Data Interface: RS232, RS422 and RS485 (2W/4W)
→ Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ WAVELENGTH SFP (Small Form-Factor Pluggable) dependent
→ NUMBER OF FIBERS SFP (Small Form-Factor Pluggable) dependent
→ OPTICAL EMITTER SFP (Small Form-Factor Pluggable) dependent
→ LED INDICATORS - Fiber Status - Video Sync Presence
→ - Received Data - Transmitted Data - Power
→ CONNECTORS
→ Optical: SFP modules
→ Power: Terminal Block
→ Video: BNC
→ Data: RJ45 (5 pcs. Included)
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 5W
→ Rack Mount: From Rack
→ Number of Rack Slots: 3
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 3.3 in., (15.5 x 13.5 x 8.3 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
→ Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ (5) RJ45 - RJ45 Breakout Wiring Kit (Includes cable and terminal block)
→ Add '-C'for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ Add "HP" for 23dB
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty
The ComNetTM FVT/FVR80D8SFP series optical video link provides transmission of eight 10-bit short-haul quality digitally encoded video channels and eight bi-directional data channels through a selectable small form factor pluggable module (SFP).
The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.
The FVTFVR80D8SFP is Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. This model features voltage transient protection on all power and signal input/output lines, which provides unconditional protection from power surges and other voltage transient events.
