Comnet FVT/FVR80SFP 8-Channel 10-Bit Digitally Encoded Video Using Small Form-Factor Pluggable (SFP) Optical Modules

→ Up to 8 10-bit digital video channels
→ Uses interchangeable SFPs for fiber type, distance and connector
→ Exceeds all requirements for RS-250C medium haul transmission
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz - 6.5 MHz
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss
→ Budget
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ WAVELENGTH SFP (Small Form-Factor Pluggable) dependent
→ NUMBER OF FIBERS* SFP (Small Form-Factor Pluggable) dependent
→ OPTICAL EMITTER SFP (Small Form-Factor Pluggable) dependent
→ LED INDICATORS - Fiber Status - Video Sync Presence - Power
→ CONNECTORS
→ Optical: SFP modules
→ Power: Terminal Block
→ Video: BNC
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 4W
→ Rack Mount: From Rack
→ Number of Rack Slots: 2
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 2.2 in., (15.5 x 13.5 x 5.6 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
→ Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add "HP" to model number for 23 dB.
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty