Comnet FVT/FVR81(M)(S)1 8-Channel Digitally Encoded Video Multiplexer

→ Digitally encoded video transmission, transmits 8 real-time color video signals
→ Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
→ Robust design ensures extremely high reliability in unconditioned out-of-plant environments
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Input/output Channels: 8
→ Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
→ Differential Gain: <4%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 57 dB Typical
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6 MHz Bandwidth
→ WAVELENGTH 1310 nm, Multimode and Single Mode
→ NUMBER OF FIBERS 1
→ OPTICAL EMITTER Laser Diode
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ LED INDICATORS - Video Sync Presence for Each Video Channel - Optical Carrier Detect - Power
→ FIBERS REQUIRED 1
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 4W
→ Rack Mount: From Rack
→ Number of Rack Slots: 2
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 2.2 in., (15.5 x 13.5 x 5.6 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Add "HP" to model number for 23dB.
→ Five year warranty