Comnet FVT/FVR8SFP2R EIGHT 10-BIT DIGITALLY ENCODED VIDEO CHANNELS + REDUNDANT POINT-TO-POINT DUAL SMALL FORM-FACTOR PLUG
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Dual optical ports (SFP) Redundant Point to Point configuration
→ Exceeds all requirements for RS250C medium haul transmission
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines
→ Hot Swappable Modules
→ Bicolor (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ VIDEO
→ Video Input: 1 volt pkpk (75 ohms)
→ Overload: >1.5V pkpk
→ Bandwidth: 5 Hz 6.5 MHz
→ Differential Gain: <2%
→ Differential Phase: TBA
→ Tilt: <1%
→ Signal to Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
→ Max. RG59 COAX Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ WAVELENGTH SFP (Small Form Factor Pluggable) dependent
→ NUMBER OF FIBERS* SFP (Small Form Factor Pluggable) dependent
→ OPTICAL EMITTER SFP (Small Form Factor Pluggable) dependent
→ LED INDICATORS Fiber Status
→ Video Sync Presence
→ Power
→ CONNECTORS
→ Optical: 2 SFP modules
→ Dual Port configuration
→ (Required for Redundant Point to Point operation)
→ Power: Terminal Block
→ Video: BNC
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount:
→ Surface Mount: 815 VDC @ 3W
→ Current Protection: Automatic Resettable Solid State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 2.2 in., (15.5 x 13.5 x 5.6 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: 40° C to +75° C
→ Storage Temp: 40° C to +85° C
→ Relative Humidity: 0% to 95% (noncondensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ Lifetime Warranty
The ComNetTM FVT/FVR8SFP2R series optical video link provides eight 10-bit medium-haul quality digital video channels, and has dual optical (SFP) ports to provide a redundant Point-to-Point topology. The redundant Point-to-Point topology using the dual optical ports provide fail safe operation in the event of loss of one fiber or one optical module. Each port accepts a wide variety of SFP modules.
The FVT/FVR8SFP2R features a Plug-and-play design, which ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
