Comnet FVT/FVR8SFP2RD8 Eight 10-bit Digitally Encoded Video Channels With Eight Bi-directional Data Channels + Redundant Point-to-point Dual Small Form-factor Pluggable (SFP) Optical Ports
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ 8 Bi-directional data channels
→ Dual optical ports (SFP) Redundant Point-to-Point configuration
→ Exceeds all requirements for RS-250C medium haul transmission
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Automatic resettable fuses on all power lines
→ Hot-Swappable Modules
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ VIDEO
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz 6.5 MHz
→ Differential Gain: <2%
→ Differential Phase: TBA
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
→ Max. RG-59 COAx Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ DATA
→ Data Interface: RS-232, RS-422 and RS-485 (2W/4W)
→ Data Format: NRZ, NRZI, Manchester, Bi-phase, Sensornet
→ Data Rate: DC-250 Kbps (NRZ)
→ WAVELENGTH SFP (Small Form-Factor Plug-able) dependent
→ NUMBER OF FIBERS* SFP (Small Form-Factor Pluggable) dependent
→ OPTICAL EMITTER SFP (Small Form-Factor Pluggable) dependent
→ LED INDICATORS Fiber Status Video Sync Presence, Received Data Transmitted, Data Power
→ CONNECTORS
→ Optical: 2 SFP modules
→ Dual Port configuration
→ (Required for Redundant
→ Point-to-Point operation)
→ Power: Terminal Block
→ Video: BNC
→ Data: Terminal Block
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 3W
→ Rack Mount: From Rack
→ Number of Rack Slots: 3
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 3.3 in., (15.5 x 13.5 x 8.3 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
→ Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adapter Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty
The ComNetTM FVT FVR8SFP2RD8 series optical video link provides eight 10-bit medium-haul quality digitally encoded video channels, eight bi-directional data channels and has dual optical (SFP) ports to provide a redundant Point-to-Point topology. The redundant Point-to-Point topology uses dual optical ports, which provide fail safe operation in the event of loss of one fiber or one optical module. Each port accepts a wide variety of SFP modules.
A Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.
The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.
The FVT FVR8SFP2RD8 is Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. This model features voltage transient protection on all power and signal input/output lines, which provides unconditional protection from power surges and other voltage transient events.
