Comnet FVT/FVRXA4C1(M)(S) 4-Channel Digital Audio With Bi-directional Contact Closure

→ 24-bit 96 kHz Digital Transmission
→ One Bi-directional Contact Closure
→ 20Hz – 18 kHz Audio Bandwidth
→ 600 Ohms Audio Input Impedance
→ No In-field electrical or optical adjustments
→ Bi-color (Red/Green) LED status indicators confirm equipment operating status
→ Transmits Balanced Line-Level Audio up to 6dBm
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use
→ – ComFit
→ Distances up to 30 miles (48 km) without repeaters
→ Automatic resettable fuses on all power lines
→ AUDIO
→ Input/Output Channels: 4 (balanced)
→ Audio Input/Output Signal: 4.4 volt pk-pk ( 6dBm)
→ Bandwidth: 20Hz – 18 kHz
→ Total Harmonic Distortion: 0.05%
→ Signal-to-Noise Ratio (SNR): 85dB (Typical)
→ CONTACT
→ Contact Interface: Response Time: 0.5 msec
→ Input: Dry Contact Closure
→ Output: SPST Relay, 0.5 A Contact Rating normally open
→ WAVELENGTH 1310 nm/1550 nm, Multimode and Single Mode
→ NUMBER OF FIBERS 1
→ LED INDICATORS Link Audio Channels 1-4
→ Contact Closure Power
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Audio: Terminal Block
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 2 W
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable
→ Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Lifetime Warranty