AVSupply

4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | E: sales@avsupply.com

#1 ELECTRONICS DISTRIBUTOR IN WHOLESALE | GOVERNMENT/GSA | EDUCATION | INTERNATIONAL

Comnet FVT1031(M)(S)1P Digitally Encoded (10-Bit) Video With Bi-directional Data Transmitter For Pelco Dome Cameras

Comnet FVT1031(M)(S)1P Digitally Encoded (10-Bit) Video With Bi-directional Data Transmitter For Pelco Dome Cameras

Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.


Price Documents
10-bit digital video transmission
Exceeds all requirements for RS-250C short-haul transmission
Compatible with Pelco Spectra III/IV
Distances up to 60 km (37 miles)
Designed to be internally mounted within a Pelco Spectra dome
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss
Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
Module to maintain 6Mhz Bandwidth
DATA
Data Format: RS-422
Data Rate: DC-115 Kbps (NRZ)
WAVELENGTH 1310/1550 nm, MM and SM
NUMBER OF FIBERS 1
OPTICAL EMITTER Laser Diode
CONNECTORS
Optical: ST
ELECTRICAL & MECHANICAL
Power: 8-15 VDC, 80 mA from Dome
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (LxWxH) 4.0 x 2.5 in., (10.16 x 6.4 cm)
Shipping Weight: <0.5 lb./0.225 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40° C to 75° C
Storage Temp: -40° C to 85° C
Relative Humidity: 0% to 95% (non-condensing)
May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
Lifetime Warranty

The ComNet TM FVT1031P series video transmitter along with the ComNet TM FVR1031 series receiver supports simultaneous broadcast-quality video transmission of 10-bit digitally encoded video and bi-directional RS422 data over one multimode or single mode optical fiber. The FVT1031P is designed to plug directly into the Pelco Spectra III/IV dome, and connects with power, video input and two way data via the Pelco electrical connector.

This model provide voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.

Similar Models:

FVT1031M1P: Video Transmitter/Data Transceiver, Multimode 62.5/125μm, 16 dB, 3 km (2 miles)
FVR1031M1: Video Receiver/Data Transceiver, Multimode 62.5/125μm, 16 dB, 3 km (2 miles)
FVT1031S1P: Video Transmitter/Data Transceiver, Single Mode 9/125μm, 20 dB, 60 km (37 miles)
FVR1031S1: Video Receiver/Data Transceiver, Single Mode 9/125μm, 20 dB, 60 km (37 miles)