
Comnet FVTR(M)(S)1 Bi-directional Digitally Encoded Video Or Sync
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Bi-directional Video or Sync
→ Compatible with all NTSC, PAL, or SECAM CCTV camera systems
→ Full Color Compatibility
→ Exceeds RS-250C Short-Haul quality
→ No In-field electrical or optical adjustments
→ Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
→ Integrated WDM for greater product reliability
→ Distances up to 30 miles (48 km) without repeaters
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use ComFit
→ Automatic resettable fuses on all power lines
→ Video:
→ Video Input: 1 volt pk-pk (75 ohms)
→ Overload: >1.5V pk-pk
→ Bandwidth: 5 Hz - 10 MHz
→ Differential Gain: <2%
→ Differential Phase: <0.7°
→ Tilt: <1%
→ Signal-to-Noise Ratio (SNR): >67 dB @ Maximum
→ Optical Loss Budget
→ Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
→ Module to maintain 6 MHz Bandwidth
→ WAVELENGTH 1310/1550 nm, Multimode
→ and Single Mode
→ NUMBER OF FIBERS 1
→ LED INDICATORS - Video Present - Power - Optical
→ CONNECTORS
→ Optical: ST
→ Power: Terminal Block
→ Video: BNC (Gold Plated Center-Pin)
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 2 W
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable Solid-State
→ Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in.,(15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to +75° C
→ Storage Temp: -40° C to +85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ May be extended to condensation conditions
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Lifetime Warranty
The ComNetTM FVTR series video transmitter/ receiver supports the transmission of short-haul quality 10-bit digitally encoded bi-directional video or sync over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.
Tested and certified by an independent laboratory for full compliance with the environmental requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection).
Similar Models:
FVTRM1A: Video Transmitter (1310/1550 nm), Multimode 1 62.5/125μm, 3 km (2 miles), 1 Rack Slot
FVTRM1B: Video Receiver (1310/1550 nm), Multimode 1 62.5/125μm, 3 km (2 miles), 1 Rack Slot
FVTRS1A: Video Transmitter (1310/1550 nm), Single Mode 1 9/125μm, 48 km (30 miles), 1 Rack Slot
FVTRS1B: Video Receiver (1310/1550 nm), Single Mode 1 9/125μm, 48 km (30 miles), 1 Rack Slot










