Comnet FVXATR1C1(M)(S) Duplex (2 Way) Audio And Contact Closure
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ One bi-directional Contact Closure
→ 20Hz – 8 kHz Audio Bandwidth
→ 600 Ohms Audio Input Impedance
→ No In-field electrical or optical adjustments
→ Bi-color (Red/Green) LED status indicators confirm equipment operating status
→ Transmits Balanced or Unbalanced Line-Level Audio up to 6dBm
→ Distances up to 48 km (30 miles) without repeaters
→ Hot-swappable rack modules
→ Interchangeable between stand-alone or rack mount use, ComFit
→ Automatic resettable fuses on all power lines
→ AUDIO
→ Input/Output Channels: 1 (balanced)
→ Audio Input/Output Signal: 2.2V pk-pk
→ Bandwidth: 20Hz – 8 kHz
→ Total Harmonic Distortion: < 1%
→ Signal-to-Noise Ratio (SNR): 60dB (Typical)
→ I/O Impedance: 600O (Single-ended or Differential)
→ Loss of Signal Relay Alarm: Solid State Relay (0-250V, 190 mA AC/DC)
→ CONTACT
→ Contact Interface: Response Time: 0.5 msec
→ Input: Dry Contact Closure
→ Output: SPST Relay, 0.5 A Contact Rating normally open
→ WAVELENGTH 1310 nm/1550 nm, Multimode and Single Mode
→ NUMBER OF FIBERS 1
→ LED INDICATORS Link Power
→ CONNECTORS Optical: ST
→ Power: Terminal Block
→ Audio: Terminal Block
→ ELECTRICAL & MECHANICAL
→ Power:
→ Surface Mount: 8-15 VDC @ 2 W
→ Rack Mount: From Rack
→ Number of Rack Slots: 1
→ Current Protection: Automatic Resettable
→ Solid-State Current Limiters
→ Circuit Board: Meets IPC Standard
→ Size (in./cm) (LxWxH) 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
→ Shipping Weight: <2 lb./0.9 kg
→ ENVIRONMENTAL
→ MTBF: >100,000 hours
→ Operating Temp: -40° C to 75° C
→ Storage Temp: -40° C to 85° C
→ Relative Humidity: 0% to 95% (non-condensing)
→ Other optics available. Contact factory.
→ Included Power Supply operating temperature range is 0 40° C.
→ May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating.
→ 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
→ Add '-C' for Conformally Coated Circuit Boards (Extra charge, consult factory)
→ DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
→ Five year warranty
The ComNetTM FVXATR1C1(M)(S)1 series audio transceiver provides for the transmission of bi-directional audio signal and bi-directional contact closure over one multimode or single mode optical fibers. The modules use frequency modulation (FM) for superior transmission of balanced or unbalanced line-level audio. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators confirm power and link operating status.
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
Similar Models:
FVXATR1C1M1A: Bi-Directional Audio Transceiver (1310 nm/1550 nm), Multimode 62.5/125μm, 16 dB, 3 km (2.5 miles), Rack slots 1
FVXATR1C1M1B: Bi-Directional Audio Transceiver (1550 nm/1310 nm), Multimode 62.5/125μm, 16 dB, 3 km (2.5 miles), Rack slots 1
FVXATR1C1S1A: Bi-Directional Audio Transceiver (1310 nm/1550 nm), Single Mode 9/125μm, 16 dB, 48 km (30 miles), Rack slots 1
FVXATR1C1S1B: Bi-Directional Audio Transceiver (1550 nm/1310 nm), Single Mode 9/125μm, 16 dB, 48 km (30 miles), Rack slots 1
