Dalsa-Coreco XCELERA-HS PX8 Digital Frame Grabber
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Acquisition: 1 x camera based on CX4 cable technology; Area scan and line scan; Data rate up to 1.5 GB/sec
→ Resolution: Horizontal size = 8 bytes to 256 Kbytes; Vertical size = 1 line to infinite for line scan, 1 line to 16 million lines in area scan; Support variable frame length (up to 16 million lines)
→ On-Board Memory: 256MB
→ Scanning: Progressive
→ Max Data Rate: Front End BW = 1.5 GB/sec; Back End BW = 1.5 GB/sec
→ Pixel Format: Support for 8- bit. Future options = 10, 12, 14 and 16-bit mono, 24-bit RGB and Bayer
→ Post-processing (Future option): 1 x 8-bit in, 8-bit out; 1x 10-bit in, 10-bit out; 1 x 12 -bit in, 12-bit out; 3 x 8-bit in, 8-bit out for RGB cameras; Flat-field/ flat-line correction; Bayer decoding
→ Controls: Comprehensive event notification; Timing control logic for EXSYNC, PRIN and strobe signals
→ Communication Channel: Native Mode = 300MB/s uplink;300MB/s downlink; Emulated serial port interface (9600 – 115200 baud); Line scan direcdirection control (Programmable on CC1...CC4)
→ Connectors: 1 x CX4 thumbscrew connector for incoming data from camera; 1 x CX4 thumbscrew connector for outgoing data forwarding; CMD15 for Board Trigger, Strobe and 1 General Output (main bracket); DB37 for Board Trigger, Strobe and General I/O (separate bracket)
→ LED: 2 LEDs to report error conditions and acquisition status.
→ I/O (Main Bracket): 1 general opto-coupled output; 1 opto-coupled dual-phase quadrature shaft encoder (TTL/RS-422); 1 opto-coupled external trigger inputs (5V/24V, switch selectable); 1 strobe output (TTL)
→ I/O (Auxiliary Bracket): 4 opto-coupled general inputs (5V/24V, switch selectable); 4 general opto-coupled outputs; 1 opto-coupled dual-phase quadrature shaft encoder (TTL/RS-422); 2 opto-coupled external trigger inputs (5V/24V, switch selectable); 1 strobe output (TTL)
→ Certification: FCC Class A; CE; EU & China RoHS
→ Software: Supported by Sapera LT and Sapera .; Microsoft Windows 7, Windows XP and Windows; Vista 32/64-bit
→ System Requirements: Intel Pentium 4 or higher class CPU, 1GB system memory, 100 MB free hard-drive space, one free PCIe x8 slot.
→ Product ID: HSPX8
→ Camera Interface: 1 HSLink
→ Camera Format: HSLink
→ Pixel Clock: N/A = Pixel type
→ Bits/Pixel: 8
→ Number of Camera Taps: Up to 32 taps/8-bit
→ Host Bus: PCIe x8
→ Frame Buffer: 128 MB
→ Advanced Features: Data Forwarding, CRC, Board sync
→ OS Support: XP Pro, Vista, Windows 7 (32/64-bit)
→ Software: Sapera Processing, Sapera Essential, Sapera LT
→ GPIO: On-board 4-in/4-out; more with auxiliary bracket
→ HS-Link Interface - Next generation image acquisition interface
→ Image acquisition at rates up to1.5GByte/s
→ Ultra compact, field proven CX4 cable and connector
→ Dedicated communication channel supports data rates up to 300MByte/s (600MByte/s total)
→ Built-in support for data forwarding for distributed processing
→ Supports Windows® 32/64-bit , Windows 7®, Windows XP®, and Windows Vista®
→ ROHS compliant
Advanced PCIe x8 image acquisition
Building on the field proven technology and performance of DALSA's
Xcelera-CL frame grabbers, the Xcelera-HS Series leverages the PCI
Express (PCIe) platform to bring traditional image acquisition and
processing technology to new levels of performance and flexibility.
The PCIe host interface is a point-to-point host interface allowing
simultaneous image acquisition and transfer involving little
intervention from the host CPU. Designed with the requirements of
the machine vision OEMs in mind, the Xcelera-HS
PX8 combines HS-Link interface with onboard preprocessing
functions such as shading correction, Bayer decoding etc.
Addressing the emerging needs of bandwidth-hungry machine vision
applications, DALSA's Xcelera HS Series is defining next generation
frame grabber capabilities to deliver image acquisition bandwidth
of 1.8GByte/sec and host transfer bandwidth of 2GByte/s over
multiple-lane PCI Express implementations with room to grow.
The Xcelera-HSPX8 has been built within DALSA's
Trigger-to-Image Reliability technology framework. Trigger-to-Image
Reliability leverages DALSA's hardware and software innovations to
control, monitor and correct the image acquisition process from the
time that an external trigger event occurs to the moment the data
is sent to the host, providing traceability when errors do occur
and permitting recovery from those errors.
Software Support
All of the frame grabbers in the Xcelera series are supported by
DALSA's Sapera Essential software package. Sapera Essential, is a
cost-effective machine vision software toolkit that bundles board
level acquisition and control with advanced image processing
capability, featuring a value added, all new geometric search tool.
Sapera Essential is designed to deliver the critical functionality
needed to design, develop and deploy high-performance machine
vision applications while at the same time significantly lowering
deployment costs.
The HSLink1 interface is a new machine vision connectivity
interface pioneered by DALSA. HSLink is designed specifically to
meet the needs of all machine vision applications and therefore
carries image data, configuration data and low jitter, real time
triggering signals over a simple network topology supporting
cameras, intermediate devices and frame grabbers. The interface has
taken the key strengths of Camera Link, and added new features and
functions. HSLink delivers scalable bandwidth of 300 to 6000
Mbytes/s, 1x to 20x configurations while using globally available,
off-theshelf components.
Similar Models:
Xcelera-CL LX1 Base: 1 Base Inputs;Pixel clock upto 85 MHz;PCle x1 Host Bus
Xcelera-AN LX1 Quad: RS170, CCIR,or progressive scan=4 independent inputs;Pixel Clock upto 40MHz;PCle x1 Host Bus
Xcelera-CL PX4 Dual: 2 base or 1 med Inputs;Pixel Clock upto 85MHz;PCle x4 Host Bus
Xcelera-CL PX4 Full: 1 Base,Med. or Full Inputs;Pixel Clock 20 to 85MHz;PCle x8 Host Bus
Xcelera-CL+PX8 Full: 1 Base,Med, or Full Inputs;Pixel Clock 20 to 85MHz;PCle x8 Host Bus
Xcelera-CL+PX8 Dual: 2 Base or 1 Med.Inputs;Pixel Clock 20 to 85MHz;PCle X8 Host Bus
Xcelera-CL PX4 SE: 1 Base Med.or full Inputs;Pixel Clock upto 85 MHz;PCle X4 Host Bus
Xcelera-HS PX8: 1 HSLink Inputs;Pixel Clock N/A;PCle X8 Host Bus
Xcelera-LVDS PX4: 1 up to 8 taps Inputs;Pixel Clock upto 75 MHz;PCle X4 Host Bus
