Electro-Voice CPS 4.10 1000 W Per Channel 4-channel Amplifier
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Analog Inputs: 4, electronically balanced, Phoenix-type
→ Audio Network: No
→ CAN Bus Interface: Optional (RCM-810 card)
→ Continuous Rated Power (1 kHz, THD 1%) 100v: 1000 Watts
→ Continuous Rated Power (1 kHz, THD 1%) 2Ω: 1000 Watts
→ Continuous Rated Power (1 kHz, THD 1%) 4Ω: 1000 Watts
→ Continuous Rated Power (1 kHz, THD 1%) 70v: 1000 Watts
→ Continuous Rated Power (1 kHz, THD 1%) 8Ω: 500 Watts
→ Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 900 Watts
→ Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 900 Watts
→ Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 900 Watts
→ Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 450 Watts
→ Cooling: Front-to-Rear, continuously variable fans
→ DIM 30: 0.02 %
→ Electronics Type: Amplifier
→ Frequency Response: 15 Hz-30 kHz
→ Impedance: 2/4/8/8 VLD/70 V/100V Ω
→ Input Impedance (Balanced): 20 kΩ
→ Input Sensitivity: 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
→ Intermodulation Distortion (SMPTE): 0.05 %
→ Mains Voltage: 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
→ Maximum Bridged Output 4Ω: 2000 Watts
→ Maximum Bridged Output 8Ω: 2000 Watts
→ Maximum Input Voltage: 22 9.76 Vrms
→ Network Control (IRIS-Net): Optional (RCM-810 card)
→ Signal-to-Noise Ratio (A-weighted): 103 dB
→ Slew Rate: 28 V/µs
→ Topology: Class-D
→ Total Harmonic Distortion: 0.05 %
→ Variable Load Drive (VLD): Yes
→ Height: 2RU 88.1 mm (3.47")
→ Width: 482.6 mm (19")
→ Depth: 421.5 mm (16.59")
→ Weight Net: 11.1 kg (24.47 lbs)
→ Four channels in one compact rack-efficient unit
→ 1000 W per channel
→ 70/100 V operation for distributed systems
→ Class-D design for optimum efficiency
→ Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
→ IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
→ Rear-mounted attenuators
→ Switchable 50 Hz high-pass filter (Hi-Z mode)
→ Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
→ Phoenix-type input and output connections
→ Remote power-on/off contact
→ Programmable power-on delay settings
→ Front-to-rear fans
The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation. Available in 2 RU configurations of up to eight channels, CPS-4.10 amps are compact and efficient to operate, with every detail thought through from the contractor's point of view. For fast installation and setup, CPS4.10 model features Phoenix-type input and output connectors, programmable power-on delay, remote power-on/off, rear-mounted attenuators, and switchable high-pass filters.
For worry-free dependability, there's full protection against hazards such as excessive heat, overloads, shorts, DC, back-EMF, and inrush current. And for the ultimate in system control and supervision, the optional RCM-810 module enables the inclusion of CPS amps in IRISNet networks of up to 250 devices. Offering exceptional ease, flexibility, and audio performance, CPS series is the ideal installation solution for cinema, club sound, commercial sound/life safety, and performance and sports venues.
The new four- and eight-channel CPS amplifiers from Electro- Voice feature groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks.
Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive. Power into 2 Ohms, 4 Ohms, 70V, or 100V line – no transformers are required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter (HPF) provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power.
Each contractor-friendly, multi-channel CPS amplifier also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on remote via contact closure, and rear level controls.
A module slot for the RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics and control via IRIS-Net software. In addition, using the RCM-810's Variable Load Drive feature can tailor the amplifier's output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms.
Similar Models:
CPS 4.5: 500 W Per Channel 4-channel Amplifier
CPS 8.5: 500 W Per Channel 8-channel Amplifier
