Electrophysics MICRONVIEWER 7290 The MicronViewer Is A Near Infrared Video Camera

→ Spectral Sensitivity 0.4 to 1.9 μm (7290A, 7290AX);
→ 0.4 to 2.2 μm (7290A-06, 7290AX-06)
→ Horizontal Resolution Up to 700 TV lines (7290A, 7290AX);
→ Up to 650 TV lines (7290A-06, 7290AX-06)
→ Dynamic Range 100:1 (7290A, 7290AX);
→ 50:1 (7290A-06, 7290AX-06)
→ Scanned Area 9.5 x 12.7 mm2
→ Damage Threshold 1 mW/cm2 (CW), 10 mJ (pulsed)
→ Decay Lag after 50 ms 45-60%
→ Sweep Rate RS-170 (7290A, 7290AX);
→ CCIR (7290A-E, 7290AX-E)
→ Scanning 2:1 interlace
→ Signal-to-Noise Ratio 55db (p-p/rms) or better
→ Deflection Distortion ±2% in circle of picture width
→ Synchronization Internal/Genlock (composite)
→ Power 6 W, 500 mA
→ Voltage Requirement 12-15 VDC (7290A, 7290AX); Rechargeable battery and recharger (7290AX)
→ Size (LxWxH) 9"x 4"x 3" (22 x 10 x 7 cm)
→ Weight 1.13 kg, 2.5 lb. (7290A);
→ 1.52 kg, 3.2 lb. (7290AX)
→ Mounts 1.0"-32 lens C-mount thread;
→ ¼"-20 UNC-2B tripod mount on base
→ Filter Slide accepts 25mm filters
→ Ambient Temperature
→ Range
→ Operating: -20°C to 50°C (-4°F to 122°F)
→ Storage: -54°C to 70°C (-65°F to 158°F)
→ Gain Control Three manual positions or automatic
→ Shading Correction Internal control
→ Sensitivity (target) Internal control
→ Video Output
→ Connector
→ BNC
→ Sync Input Connector BNC
→ Power Connector 4-pin
→ Laser beam profiling and/or analysis: Nd:YAG
→ (1.3μm), Er:Glass (1.5μm), Ho:YAG (2.1μm)
→ Viewing and aligning IR sources
→ Thermal imaging of objects hotter than 250°C
→ Moisture detection
→ Forensic analysis
→ Semiconductor sub-surface inspection
→ Accepts a variety of C-mount objective lenses
→ Integral optical filter slide permits use of 25mm long-pass,short-pass, band-pass or neutral density filters
→ 3-position manual gain or auto gain
→ Standard video output: RS170 (60Hz) or CCIR (50Hz)
→ Gen-lock input
→ Tripod mount
→ High-performance, lead-oxysulfide vidicon, 9.5x12.7mm imaging detector