→ Supreme composite to/from digital component converter.
→ Line synchronizer mode (for minimal delay).
→ SD-SDI ANC data signal pass through.
→ SD-SDI signal EDH enable/disable.
→ Monitoring analog composite output available.

The FOR-A FA 145 is a compact and very powerful TBC/FS. The FA145 is capable of analog composite to/from digital component conversion, and has wide range internal genlock capability, so that almost any VHS signal can be genlocked.

10-bit 4	2:2 component system adopted for internal signal processing.
Video Format	525/60 (NTSC) or 625/50 (PAL) (Auto detect)
Video Input	Analog composite = 1.0 Vp-p, 75Ω BNC x 1; Digital component = 270 Mbps, 75Ω, BNC x 1
Genlock Input	BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p; 75Ω, BNC x 1
Video Output	Analog composite = 1.0 Vp-p, 75Ω, BNC x 1 (for monitoring); Digital component = 270 Mbps, 75Ω, BNC x 2
Signal Processing	4:2:2 component
Correction Range	2 fields (field inversion prevented)
Sampling Frequency	Y = 13.5 MHz; C = 6.75 MHz
Quantization	10-bit
Frequency Response	100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL)
S/N Ratio	56 dB
DG/DP	1.5% / 1.5° (APL = 50%)
K-Factor (2T Pulse)	Less than 1%
H/V Tilt	Less than 1%
Proc Amp	Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE; Chroma Phase = -30° to 30°
Genlock Phase Control	H phase = -2 µs to 2 µs
Temperature / Humidity	10°C to 40°C / 30% to 90% (no condensation)
Power	100 V AC to 240 V AC ±10%, 50/60 Hz
Consumption	25 VA (16 W) at 100 V AC, 30 VA (16 W) at 220 V AC
Dimensions / Weight	212 (W) x 44 (H) x 350 (D) mm / 2.5 kg
Accessories	Operation manual, AC cord

Currently this model doesn't have any new resources

Currently this model doesn't have any similar models

Currently this model or manufacturer doesn't have any promotions

Currently this model or manufacturer doesn't have any new announcements