FOR-A UFM-125TBC Analog Frame Synchronizer & TBC
For Product Selection, Design, or Technical Support CALL (800)284-2288
Features |
Description |
Specifications |
Resources |
Videos |
Similar Models |
Promotions |
What's New
FEATURES
→ Analog composite video input/output compatible. (Y/C is also supported.)
→ Full frame memory to prevent picture field inversion during processing.
→ 10-bit digital decode / encode to ensure stable signals without bit dropout.
→ Unit-type FA-125 lineup. Compatible with a wide variety of system environments.
→ Hot-swap function allows boards to be removed and inserted even when the power is on.
→ Can be mounted on two different frames (casings) --UF-106A, UF-112--according to the system size.
→ Full frame memory to prevent picture field inversion during processing.
→ 10-bit digital decode / encode to ensure stable signals without bit dropout.
→ Unit-type FA-125 lineup. Compatible with a wide variety of system environments.
→ Hot-swap function allows boards to be removed and inserted even when the power is on.
→ Can be mounted on two different frames (casings) --UF-106A, UF-112--according to the system size.
DESCRIPTION
The FOR-A UFM 125TBC is a module-type FS/TBC. The UFM125TBC corrects time axis distortion and synchronization phases through 10-bit processing.
SPECIFICATIONS
| 4 | 2:2 component internal signal processing. |
| Video Format | NTSC |
| Video Input | Analog composite = 1.0 Vp-p 75Ω BNC x 1; Y = 1.0 Vp-p; C = 0.286 Vp-p; 75Ω 4-pin S-connector x 1 |
| Genlock Input | BB = 0.429 Vp-p; 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.) |
| Video Output | Analog composite 1.0 Vp-p 75Ω BNC x 2; Y = 1.0 Vp-p; C = 0.286 Vp-p; 75Ω 4-pin S-connector x 1 |
| Signal Processing | 4:2:2 component |
| Correction Range | 2 fields (field inversion prevented) |
| Sampling Frequency | Y = 13.5 MHz; C = 6.75 MHz |
| Quantization | 10-bit |
| Frequency Response | 100 kHz to 4.2 MHz = ±0.5 dB, 4.2 MHz to 5.0 MHz = -1.0 dB to 0 dB, roll off above 5.0 MHz |
| S/N Ratio | 56 dB (no quantization noise) |
| DG/DP | 2% / 2° (APL 50%) |
| K-Factor (2T Pulse) | Less than 1% |
| H/V Tilt | Less than 1% |
| Residual Jitter | Y = ±15 ns, C = ±2° |
| Proc Amp | Video Level = -3 dB to 3 dB / Chroma Level = -3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE / Chroma Phase = -30° to 30° |
| Genlock Phase Control | H Phase = -2 µs to 2 µs; SC Phase = -180° to 180° |
| Temperature | 10°C to 40°C |
| Humidity | 30% to 90% (no condensation) |
| Power | Supplied from UFM frame, 12 V DC to 24 V DC |
| Power Consumption | 17 VA (17 W) |
| Dimensions | 106 (W) x 303 (D) mm (Front board); 106 (W) x 66.1 (D) mm (Rear board) |
| Weight | 0.5 kg |
| Slot Requirement | 1 slot |
RESOURCES
Currently this model doesn't have any new resources
VIDEOS
Currently this model doesn't have any new videos
SIMILAR MODELS
Currently this model doesn't have any similar models
PROMOTIONS
Currently this model or manufacturer doesn't have any promotions
WHAT'S NEW
Currently this model or manufacturer doesn't have any new announcements
Features |
Description |
Specifications |
Resources |
Videos |
Similar Models |
Promotions |
What's New









