FOR-A UFM-145DFS Frame Synchronizer & TBC
For Product Selection, Design, or Technical Support CALL (800)284-2288
Features |
Description |
Specifications |
Resources |
Videos |
Similar Models |
Promotions |
What's New
FEATURES
→ Supreme composite to/from digital component converter.
→ Line sync or Frame sync selectable.
→ 10-bit digital Y/C comb filter.
→ SD-SDI ANC data pass through.
→ SD-SDI signal EDH enable/disable.
→ Proc Amp function.
→ Monitoring analog composite available.
→ Dedicated optional audio interface, UFM-100AED, enables embedded/de-embedded audio.
→ Hot-swap architecture.
→ Line sync or Frame sync selectable.
→ 10-bit digital Y/C comb filter.
→ SD-SDI ANC data pass through.
→ SD-SDI signal EDH enable/disable.
→ Proc Amp function.
→ Monitoring analog composite available.
→ Dedicated optional audio interface, UFM-100AED, enables embedded/de-embedded audio.
→ Hot-swap architecture.
DESCRIPTION
The UFM 145DFS is a module-type TBC/FS with the supreme analog composite to/from digital component converter. The UFM145DFS has wide internal genlock capability, so that almost any SD-SDI or composite signal can be genlocked.
SPECIFICATIONS
| 10-bit 4 | 2:2 component system adopted for internal signal processing. |
| Video Formats | 525/60 (NTSC) or 625/50 (PAL) (Auto detect) |
| Video Input | Analog composite = 1.0 Vp-p 75Ω BNC x 1; Digital component = 270 Mbps 75Ω BNC x 1 |
| Genlock Input | BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p; 75Ω, BNC x 1 |
| Video Output | Analog composite = 1.0 Vp-p 75Ω BNC x 1 (for monitoring); Digital component = 270 Mbps 75Ω BNC x 2 |
| Signal Processing | 4:2:2 component |
| Correction Range | 2 fields (field inversion prevented) |
| Sampling Frequency | Y = 13.5 MHz; C = 6.75 MHz |
| Quantization | 10-bit |
| Frequency Response | 100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL) |
| S/N Ratio | 56 dB |
| DG/DP | 1.5% / 1.5° (APL = 50%) |
| K-Factor (2T Pulse) | Less than 1% |
| H/V Tilt | Less than 1% |
| Proc Amp | Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE; Chroma Phase = -30° to 30° |
| Genlock Phase Control | H phase = -2 µs to 2 µs |
| Temperature | 10°C to 40°C |
| Humidity | 30% to 90% (no condensation) |
| Power | Supplied from UFM frame, 12 V DC to 24 V DC ±10% |
| Power Consumption | 11 VA (11 W) |
| Dimensions | 106 (W) x 303 (D) mm (Front board); 106 (W) x 66.1 (D) mm (Rear board) |
| Weight | 0.5 kg |
| Slot Requirement | 1 slot |
| Accessories | Operation manual |
| Require Slots | 1 slot |
RESOURCES
Currently this model doesn't have any new resources
VIDEOS
Currently this model doesn't have any new videos
SIMILAR MODELS
Currently this model doesn't have any similar models
PROMOTIONS
Currently this model or manufacturer doesn't have any promotions
WHAT'S NEW
Currently this model or manufacturer doesn't have any new announcements
Features |
Description |
Specifications |
Resources |
Videos |
Similar Models |
Promotions |
What's New









