Flir F-645 F-Series Thermal Security Cameras With IP And Analog Functionality

→ Sharper thermal images that provide greater scene detail; improves threat detection and alarm assessment capabilities
→ Long-range threat detection; see smaller details from farther away
→ Enhanced analytics performance; gives you more reliable feedback with fewer nuisance alarms
→ Wider fields of view improve coverage without compromising range performance; optimize coverage efficiency while lowering overall installation cost
→ Simultaneous IP and analog video outputs, along with IP and serial control interfaces for easy integration into IP or analog networks; use them in an existing analog environment, and migrate easily to a future IP network
→ Sun-safe VOx uncooled thermal sensor technology; looking directly at the sun won't damage FLIR uncooled thermal security cameras
→ Exchangeable camera cassettes allow for quick upgrade or repair of sensors and optics
→ Open IP standards for plug-and-play integration; ONVIF compliant
→ Streaming digital video available in H.264, MPEG-4, or M-JPEG formats
→ Array Format (NTSC): 640 x 480
→ Detector Type: Long-Life, Uncooled VOx Microbolometer
→ Effective Resolution: 307,200
→ Pixel Pitch: 17μm
→ Field of View: 45° x 37° (13 mm)
→ Zoom: 2x & 4x E-zoom
→ Spectral Range: 7.5 μm to 13.5 μm
→ Focus Range: Athermalized, focus-free
→ Frame Rate: NTSC: 30Hz; PAL 25Hz
→ Composite Video NTSC or PAL: Standard
→ Video Over Ethernet: Two independent channels of streaming MPEG-4, H.264, or M-JPEG
→ Point to Point (stand alone): Standard
→ Ethernet: Standard
→ Serial: RS-232/-422; Pelco D, Bosch
→ Network Enabled: Standard
→ Weight: ~10.0 lb (configuration dependent)*
→ Dimensions (L,W,H): 18.1" x 5.5" x 6.3"
→ Power Requirements: 24VAC (20-30 VAC); 24VDC (21-30VDC)
→ Power Consumption: 24VAC = 15VA (max w/o heaters); 51 VA (max w/ heaters); 24 VDC: 10 W (max w/o heaters); 46 W (max w/ heaters)

* weight does not include contents of other system components.