Flir PT-645 640 X 480 PT-Series Pan/Tilt Thermal Security Cameras

→ Sharper thermal images that provide greater scene detail; improves threat detection and alarm assessment capabilities
→ Long-range threat detection; see smaller details from far away
→ Enhance analytics performance; gives you more reliable feedback with fewer nuisance alarms
→ Wider fields of view improve coverage without compromising range performance; optimize coverage efficiency while lowering overall installation cost
→ Simultaneous IP and analog video outputs – thermal and visible-light – along with IP and serial control interfaces for easy integration into IP or analog networks; use them in an existing analog environment, and migrate easily to a future IP network
→ Sun-safe VOx uncooled thermal sensor technology; looking directly at the sun won't damage FLIR uncooled thermal security cameras
→ Exchangeable camera cassettes allow for quick upgrade or repair of sensors and optics
→ Open IP standards for plug-and-play integration; ONVIF compliant
→ Streaming digital video available in H.264, MPEG-4, or M-JPEG formats
→ Array Format (NTSC): 640 x 480
→ Detector Type: Long-Life, Uncooled VOx Microbolometer
→ Effective Resolution: 307,200
→ Pixel Pitch: 17 μm
→ Field of View: 45° x 37°(13mm)
→ Zoom: 2x & 4x E-zoom
→ Spectral Range: 7.5 μm to 13.5 μm
→ Focus Range: Athermalized, focus-free
→ Frame Rate: NTSC: 30 Hz, PAL 25 Hz
→ Composite Video NTSC or PAL: Standard
→ Video over Ethernet: Two independent channels of streaming MPEG-4, H.264, or M-JPEG for each of two cameras
→ Point to Point (stand alone): Standard
→ Ethernet: Standard
→ Serial: RS-232/-422; Pelco D, Bosch
→ Network Enabled: Standard
→ Pan Angle/Speed: Continuous 360°; 0.1° to 60°/sec
→ Tilt Angle/Speed: +90° to -90°; 0.1° to 30°/sec
→ Weight: ~46 lb (configuration dependent)
→ Dimensions (L,W,H): 13.7" x 18.4" x 12.8"
→ Input Voltage: 21-30 VAC, 21-30 VDC
→ 24 VAC: 85 VA (max w/o heaters); 215 VA (max w/heaters); 24 VDC: 65 W (max w/o heaters); 195 W (max w/heaters)