Flir SR-35X140 MS Dual Field-of-View Multi-Sensor Thermal Camera Fixed Systems

→ See in total darkness, through smoke, dust and light fog
→ Detect man-sized threats out to 1.8 miles
→ Dual field of view thermal imaging with continuous zoom
→ Long-range daylight/lowlight camera
→ Simultaneous presentation of telephoto picture within wide-angle picture
→ Network ready with IP control and MPEG digital video output
→ Pelco D serial control
→ Composite video output for use with a broad range of video management and display systems
→ Advanced mapping, geo-location, and programmable slew to cue functions available
→ High contrast imagery optimized to get the most out of video analytics software to create virtual perimeters
→ No need for the expense and complication of added lighting infrastructure
→ All-weather contstruction
→ Backed by FLIR – the world leader in thermal security cameras
→ Array Format (NTSC): Two 320 x 240 imagers
→ Detector Type: 2 Long-Life, Uncooled VOx Microbolometers
→ Effective Resolution: 153, 600
→ Pixel Pitch: 38 μm
→ Field of View: 20° x 15° (35 mm) & 5° x 3.75° (140 mm)
→ Zoom: 2 Separate cameras Continuous E-zoom
→ Spectral Range: 7.5 μm to 13.5 μm
→ Focus Range: 21' to ∞
→ Frame Rate: NTSC: 30 Hz; PAL 25 Hz
→ Composite Video NTSC or PAL: Standard
→ Video over Ethernet: Standard
→ Point to point (stand alone): Standard
→ Ethernet: Standard
→ Serial: RS-422/Pelco D
→ Network Enabled: Yes
→ Weight: 15lbs
→ Dimensions (L,W,H): 9" x 12" x 10"
→ Power Requirements: 18 - 32 VDC
→ Power Consumption: <12 W nominal, <19 W max., 150 W w/heaters
→ Sensor Type: 1/4" Super HAD CCD
→ Lens Field of View: 42° (h) to 1.7° (h)
→ Lens Focal Length: 3.5mm to 91.0mm
→ Lens Zoom: 26x Optical Zoom, 12x E-zoom
→ Lens F/#: 1.6 to 3.8
→ Effective pixels (NTSC): 630,00
* All video outputs compatible with external video analytics. SDK available for all cameras