Ganz ZC-DW5550NXA 700 TVL WDR Color Dome, 5-50mm Auto Iris Varifocal

→ Performance: True Day/Night
→ Focal Length: 5mm-50mm
→ Iris: F1.3 - F360C (DC Auto Iris)
→ Scanning System: 2:1 Interlace
→ Image Sensor: 1/3&-type Interline transfer color CCD
→ Effective Pixels: 976 (H) x 494 (V)
→ Camera Resolution: 700 TVL (For both Color & BW)
→ Horizontal Angle of View: (Wide to Tele) 51.8° - 5.6°
→ Minimum Illumination @ F1.3: 0.08 lux Color / 0.008 lux B/W; 50 IRE, SENS UP = 0.000016 lux B/W
→ S/N Ratio: More than 50dB (at minimum ACG gain)
→ Electronic Shutter: Electronic shutter ON: 1/60 s. to 1/100,000 s.
→ Gamma Correction: 0.45
→ Sync. System: Internal synchronization (INT.) / Line Lock (L.L.) : For 60Hz regions only
→ Wide Dynamic Range (WDR): Max 82dB, 12,600x
→ Backlight Compensation: (BLC) ON / OFF
→ White Balance: ATW (Normal / Wide) / AWB / Manual
→ Sens Up: ON: Auto (x2 to x512) / OFF
→ 2D/ 3D Digital Noise Reduction: (2D/3D-DNR) (2D/3D-DNR) Extreme / High / Middle / Low
→ Electronic Zoom: ON (16 times max.) / OFF
→ Defog Image Correction: Image correction ON / OFF
→ Profile Settings: Basic / Enhanced / Casino / Sodium vapor lamp
→ AGC: ON (Extreme / High / Middle / Low) / OFF
→ ALC: -20 to +20
→ HLC: Detection level: Low / Middle / High
→ Easy Focus: Enabled with indicator
→ Privacy Mask: ON (16 spots max., 10 colors, mosaic) / OFF
→ Motion Detection: Detects all areas. 6 (horizontal) × 4 (vertical), 24 pixels in total (minimum block), sensitivity (1–10)
→ Image Stabilizer: ON / OFF
→ Monitor output mode: CRT / LCD
→ Test Pattern: Color Bar, Resolution, Grayscale, Center Cross
→ Flip /Rotate: OFF / V-Flip / H-Flip / Rotate
→ Power Source: 24 V AC ± 10% (50/60 Hz ± 1 Hz) or 12 V DC ± 10%
→ Power Consumption: 12VDC 230mA / AC24V 240mA, 3.0W
→ Operating Temp. / Humidity: 14° F ~ 122° F (-10° C ~ 50° C) / 85% humidity (non-condensing)
→ Storage Temp.: -4° F ~ 140° F (-20°C ~ 60°C) / 95% humidity (non-condensing)
→ Dimensions: 5.7& Ø x 4.3&H / 144 (Ø) mm x 110 (H) mm
→ Weight: 1.3lbs (570g)
→ Additional: Cable for service monitor, adapter ring, self-tapping screws (M4 × 20: 2 pcs.), Template, OSD operation & Instruction manual included