Hitachi HV-F202SCL Progressive Scan CCD Camera Link Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Indication lens category: 1/1.8 inch
→ Effective pixels (Active area): 1600 (H) x 1200 (V) (x 3 sensor for RGB)
→ Pixel size: 4.4 μm square lattice
→ Scanning area (Pixel area): 7.04mm (H) x 5.28mm (V), Diagonal 8.80mm (1/1.8 inch)
→ Readout type, Transfer type: progressive scan, Interline transfer
→ Scanning mode: full pixel sequential scan
scanning frequency: Horizontal : 37.5kHz / Vertical : 29.95Hz / Pixel : 72.0MHz → Optical system: 1/1.8-inch F1.8 prism with IR cut filter.
→ Lens mount: C mount: Mount surface projection less than 4.0mm
→ Flange focal distance: 17.526 mm (Air conversion)
→ Sensitivity: 2000 lx, F5.6, light source halogen lamp temp.: 3200K; Shutter: 1/30s, Gain 0dB
→ Minimum illumination: 12 lx, Video Level 50%, Gamma = 0.45; F1.8, Shutter : 1/30s, Gain +12dB
→ Gamma: 0.45 / 1.0 / LUT (Look Up Table : user customizable)
→ Gain: Manual: 0 to 12 dB / AGC : 0 to 12 dB (with limit setting)
→ White balance: Manual / One-push Auto / Continuance Auto
→ Video output: CameraLink Version 1.13 standard; Base configuration ( only D.OUT 1 ); Medium configuration ( using D.OUT 1 with D.OUT 2 ); Control : Original
→ Video output format: Base configuration 24bit (R:8bit, G:8bit, B:8bit)
→ Quantization level information: Maximum data : 255 (8bit), 1023 (10bit), 4095 (12bit); Video 100% white: 255 (8bit), 1023 (10bit), 4095 (12bit); Video 0% black: 0, Minimum data : 0
→ Electric shutter speed: OFF / Auto (AES) / Manual (VARIABLE)
→ Variable shutter mode: Exposure time : approx. 1/100,000 to 1/30 second
→ AES mode: Exposure time : approx. 1/100,000 to 1/29.95(shutter OFF) second
→ Long time integration mode: Exposure time : approx. 1/30 to 10 seconds in 1 frame steps
→ Sync system: Internal / VD external
→ Frame on demand mode:
→ Input mode: (A) Fixed shutter mode: adjustable for polarity and delay; (B) → ONE trigger mode: adjustable for polarity and delay; (C) VD reset mode : negative, frequency Approx. 29.95Hz
→ Trigger input: CameraLink (CC1) or DCIN/SYNC connector
→ Input level: 5Vp-p ± 0.5V
→ Output: strobe signal
→ VD output: negative, frequency Approx. 29.95Hz
→ Synchronous output: DCIN/SYNC connector
→ Output level: 5Vp-p
→ Registration: Full screen 0.05% (not including lens response)
→ Vertical contour correction: 2H
→ Sharpness (DTL): Level, WIDTH
→ Color masking: OFF / ON (6 color independent masking)
→ Paint black: Adjustable
→ Black level: Adjustable
→ Knee: Adjustable (Knee point and Knee slope)
→ Power supply: DC+12V ± 1V (input from DC IN / SYNC connector)
→ Current consumption: DC+12V Approx. 600mA (Approx. 7.2W)
→ Ambient temperature: (without dew condensation)
→ Performance: 0 to +40℃ (+32 to +104 F), less than 90 % RH
→ Operation: -10 to +40℃ (+14 to 104 F), less than 90 % RH
→ Storage: -20 to +60℃ (-4 to 140 F), less than 70 % RH
→ External dimensions: 55(W) x 55(H) x 89(D) mm (not including protrusions)
→ Mass: Approx. 350g (without lens)
The Hitachi HVF202SCL is an UXGA high precision 3CCD progressive scan color camera, which has single chip digital processing LSI, a C mount prism, three 1/1.8-inch 2,000,000 pixels square CCDs. Our original digital image signal processing technology performs the high picture quality signal processing and the picture compensating functions, beyond the capability of the other conventional analog cameras. More ever, high frame rate 30 FPS(s) can be transmitted by miniCameraLink interface, which is of digital camera standards for FA. The two connector arrangement is considered so that the collision of cable does not occur at the time of Meidum Configuration connection which enrich the pixel
gradation expression.
The HV F202SCL 1/1.8-inch 2,000,000 pixels square lattice progressive scan CCD and the dichroic prism for RGB color achieve a high resolution of UXGA (1600(H) x 1200(V)) picture and good color reproduction. The new designed camera has small SDR connector for digital output. Therefore, the camera has the realization of small-sized shape of 55 (W) x 55 (H) x 89 (D) mm. It is based on the industrial camera interface standard of AIA （ Automated Image Association） leadership. It is advantageous to the field, where high frame rate is needed without losing camera performance, since the transmission speed of pixel clock can be
maintained by full screen output. The SDR connector called mini CameraLink is adopted and two connectors are equipped in a small case. Additionally, when using with L type connection, it is arranged as cable collision does not occur. IIt supports Meidum Configuration connection which enables the rich gradation expression of each color of 10 bit or 12 bit. The de facto industry standard C mount lens adapter allows choosing from a various type of lenses and optical systems. Color shading due to the aberration of C mount lens is automatically compensated (reduced).
Similar Models:
HV-F202GV: GigE Vision.
