Hitachi KP-F140F IEEE1394.b Progressive Scan CCD Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Total number of pixels : 1434(H) x 1050(V)
→ No. of effective pixels : 1392(H) x 1040(V)
→ Unit cell size : 4.65(H) x 4.65(V) μm (Square pixel)
→ Scanning system : Progressive scan
→ Sync system : Internal / external
→ Video signal output
→ Interface : IEEE1394.b (FireWire 800)
→ Protocol : IEEE1394-based Digital Camera Specification Version 1.31 compliant
→ Transfer rate : 800 / 400 / 200Mbps
→ Image format : MONO8 / MONO16
→ Image size : 1360(H) x 1024(V); 1280(H) x 960(V); 1024(H) x 768(V); 800(H) x 600(V); 640(H) x 480(V)
→ Frame rate : 15fps (Condition: Mono8, 1392(H) x 1024(V))
→ Camera remote : IEEE1394 control
→ Standard sensitivity : 2000 lx F8
→ Minimum illumination : 5 lx (F1.4, Max gain)
→ Gain : Auto / Manual (0dB to 18dB)
→ Electric shutter speed : Auto (AES) / Manual (VARIABLE) From 1/100,000 second to 10 second
→ External trigger shutter : Mode Fixed shutter (Mode 0); One trigger (Mode 1); Reset control (Mode 14); VD Sync (Mode 15); Input Via IEEE1394 cable (Software trigger ); Our company original method (Hardware trigger)
→ Auto Exposure (ALC: Auto level control): Adjustable for video level
→ Gamma : OFF / LUT
→ Sharpness : Adjustable
→ Brightness : Adjustable
→ Time stamp : OFF / ON
→ Cycle timer sync : OFF / ON
→ HD reset : OFF / ON
→ Daisy chain : Possible, Even if there is no repeater. If two is connected, the frame rate becomes half.
→ Lens mount : C mount (Flange-back adjustment)
→ Power supply : DC+8V to +30V (Via IEEE1394 cable)
→ Power consumption : Approx. 4.1W (DC+12V)
→ Ambient temperature:
→ Operating : -10°C to +50°C / 30 to 80 %RH
→ Note : If operated continuously, be sure to use at less than +40 ℃(104F) for long term stable performance. → Storage : -20°C to +60°C / 20 to 90 %RH
→ Vibration endurance : 68.65 m/s2 or less (10 to 200Hz, 30 minutes each on XYZ axes) (Do not subject to strong vibration for long periods of time.)
→ Shock endurance : 490.3 m/s2 or less (vertical, horizontal, once each face)
→ External dimensions : 44(W) x 44(H) x 54(D) mm (not including lens and protrusions)
→ Mass : Approx. 130g (without lens)
→ Supplied equipment : Camera; CD-ROM (Operation manual / Driver soft)
The Hitachi KPF140F is single CCD type camera which utilized the progressive scan CCD image sensor with square pixel for SXGA format of 1/2-inch. By adoption of an IEEE1394.b interface, high-speed connection of maximum of 800 Mbps can be possible. Moreover, by daisy chain, construction of multiple camera system can be easily performed.
The Hitachi KP F140F The 1/2-inch 1,450,000 pixels square lattice progressive scan CCD achieve a high resolution and of 1360(H) x 1024(V) (SXGA). High-speed serial interface IEEE1394.b is supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. It is possible to be supplied power and trigger by one cable, and connectable to a 4 sets/port by daisy chain. Based on uncompressed data protocol IIDC1394-based Digital Camera Specification Ver.1.31, a maximum of 800Mbps high speed data transmit is available and suitable for image processing. The KP-F140F have two IEE1394.b connectors, it can link together cameras. Since one PC and the minimum number of cable can control the plural camera, simple system integration can be realized. An external trigger signal input can be used to capture an image at desired timing for instant view or processing. The software trigger via an IEEE1394 cable and our original system corresponding to the hardware trigger can deal with all trigger signals.
Similar Models:
KP-F140SCL: Mini Camera Link (Mini CL); 30 fps.
KP-F140PCL: Power Over Camera Link (PoCL); 30 fps.
