Hitachi KP-F145GV GigE Vision Progressive Scan Industrial Camera

Hitachi KP-F145GV: GigE Vision Progressive Scan Industrial Camera The Hitachi KPF145GV is single CCD type camera which utilized the progressive scan CCD image sensor with square pixel for SXGA format of 2/3-inch. By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by using hub or switcher, construction of multiple camera system can be easily performed.applications.

The Hitachi KP F145GV 2/3-inch 1,450,000 pixels square lattice progressive scan CCD achieve a high resolution of 1360(H) x 1024(V) (SXGA) and near infrared sensitivity. High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. It is possible to 100m. Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed data transmit is available and suitable for image processing. Development of camera control system is easy because industrial camera control API "GENiCAM" lead EMVA (European Machine Vision Association). Power supply can be input via Ethernet cable (Power over Ethernet).

Similar Models:
KP-F145WCL: CameraLink Progressive Scan Industrial Camera
→ Imaging device: 2/3-inch progressive scan interline CCD
→ Total pixels: 1432 (H) x 1050 (V)
→ Effective pixels: 1392 (H) x 1040 (V)
→ Pixel size: 6.45 um (H) x 6.45 um (V) (square lattice)
→ Scanning area: 8.98 mm (H) x 6.71 mm (V)
→ Scanning system: Progressive
→ Aspect ratio: 4 : 3
→ Frame rate: 30 frames per second (full pixel readout)
→ Sync system: Internal / external
→ Lens mount: C mount
→ Flange focal distance: 17.526 mm
→ Video output:
→ Interface: Gigabit Ethernet
→ Protocol: GigE Vision compliant
→ Transfer: 1 Gbit per second
→ Image format: Mono 8/10/12bit
→ Maximum image size: 1360 (H) x 1024 (V)
→ Frame rate: 30 frame per second
→ Sensitivity: 400lx, F4, 3200K
→ Minimum illumination: 2.5 lx (F1.4 GAIN MAX)
→ Electric shutter: OFF / Auto (AES) / Manual (PRESET or VARIABLE); OFF is normal exposure (frame rate); PRESET 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. VARIABLE 10 to 1/100000 second
→ External trigger shutter:
→ Mode: Fixed shutter; One trigger; VD Sync; Reset control
→ Input: Via Gigabit Ethernet cable (Software trigger); 12-pin connector (Hardware trigger)
→ Input level: 24Vp-p +/- 1V
→ Threshold: 3.7V +/- 0.5V (Low --> High); 3.3V +/- 0.5V (High --> Low)
→ Input polarity: High / Low adjustable
→ Input delay: Adjustable
→ External sync signal:
→ VD output: 5Vp-p +/- 0.3V
→ Strobe out: 5Vp-p +/- 0.3V
→ Output delay: High / Low adjustable
→ Strobe delay: Adjustable
→ Strobe duration: Adjustable
→ Partial scan: Selectable start position and width of picture grabbing in 1H step.
→ ALC (Auto level control): Adjustable for video level
→ Gain: Auto / Manual (0dB to 12db)
→ Gamma: OFF (γ=1) / ON
→ V-Binning: OFF / ON
→ Sharpness: Adjustable
→ Black level: Adjustable
→ Knee: Adjustable (Knee point and Knee slope)
→ Power supply voltage: DC+12V +/- 1V (input from 12-pin connector) 48V (PoE)
→ Current consumption: Approx. 6.0W (DC+12V); When partial scan is on, Max Approx. 6.6W (DC+12V)
→ Ambient:
→ Performance: 0 to +40°C (+32 to +104 F), less than 90 % RH
→ Operation: -10 to +50°C (+14 to +122 F), less than 90 % RH
→ Storage: -20 to +60°C (-4 to +140 F), less than 70 % RH (without dew condensation)
→ Note: If operated continuously, be sure to use at less than +40°C (+104F) for long term stable performance.
→ Vibration endurance: 98.6 m/s² or less (10 to 200 to 15Hz, 30 minutes each on XYZ axes) (Do not subject to strong vibration for long periods of time.)
→ Shock endurance: 490.3 m/s² or less (vertical, horizontal, once each face)
→ External dimensions: 44(W) x 29(H) x 72(D) mm (not including lens and protrusions)
→ Mass: Approx. 140g