Hitachi KP-F200SCL 2.01 Megapixel Black & White Power Over Camera Link Industrial Camera

→ Imaging device: 1/1.8-inch interline CCD
→ Total pixels: 1688 (H) x 1248 (V)
→ Effective pixels: 1628 (H) x 1236 (V)
→ Pixel size: 4.4 um (H) x 4.4 um (V) (square lattice)
→ Sensing area 7.16 mm (H) x 5.44 mm (V)
→ Scanning system: Progressive
→ Aspect ratio: 4 : 3
→ Frame rate: 15 frames per second (full pixel readout)
→ Horizontal drive frequency: 36.0000 MHz
→ Horizontal scanning frequency: 18.75 kHz
→ Vertical scanning frequency: 14.97 Hz
→ Sync system: Internal
→ Lens mount: C mount
→ Flange focal distance: 17.526 mm
→ Video output: Digital output (CameraLink)
Base configuration: 36.0000 MHz (Note: maximum cable length is 10 m); Output image size: 1628 (H) x 1236 (V)(full pixel readout)
→ Resolution: Horizontal / Vertical: 1200 TV lines
→ Sensitivity: 400 lx, F4, 3200 K
→ Minimum illumination: 1.0 lx (F1.4, MAX GAIN, without IR cut filter)
→ Signal noise to ratio: 50 dB
→ Electric shutter: OFF, 1/15, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second)
→ Gamma: γ = 1
→ Frame on demand: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) VD reset mode
→ Partial scan: Selectable start position and width of picture grabbing in 1H step.
→ Power supply voltage: 12 ± 1 VDC
→ Current consumption: Approx. 170 mA (approx. 2.1 W)
→ Ambient Performance: 0 to 40 °C ( 32 to 104 F), less than 90 % RH
Operation: -10 to 50 °C ( 14 to 122 F), less than 90 % RH
Storage: -20 to 60 °C (-4 to 140 F), less than 70 % RH (without dew condensation)
→ Vibration endurance: 98 m/s² (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
→ Shock endurance: 686 m/s²(Drop test, once each top, bottom, left and right)
→ External dimensions: 29 (W) x 29 (W) x 29 (D) mm (Not including protrusions)
→ Mass: Approx. 50 g