Hitachi KP-F500WCL CameraLink Progressive Scan CCD Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Total pixels: 2456 (H) x 2058 (V)
→ Effective pixels: 2456 (H) x 2058 (V)
→ Pixel size: 3.45 um (H) x 3.45 um (V) (square lattice)
→ Sensing area: 8.47 mm (H) x 7.10 mm (V)
→ Scanning system: Progressive
→ Aspect ratio: 4 : 3
→ Frame rate: 16 frames/second (full pixel readout)
→ Horizontal drive frequency: 64.0000 MHz
→ Horizontal scanning frequency: 33.264 kHz
→ Vertical scanning frequency: 16.00 Hz (full pixel readout); 31.98 Hz (vertical 2 pixel addition mode)
→ Sync system: Internal
→ Lens mount: C mount
→ Flange focal distance: 17.526 mm
→ Video output: Digital output (Camera Link)
→ Base configuration: 64.0000 MHz x 2TAP
→ Medium configuration: 32.0000 MHz x 4TAP
→ Maximum cable length: 10 m
→ Output image size: 2456(H) x 2058(V) (full pixel readout)
→ Resolution: Horizontal/Vertical: 2000TV lines
→ Sensitivity: 500 lx, F11, 3200 K
→ Minimum illumination: 1.0 lx (F1.4, MAX GAIN)
→ Signal noise to ratio: 48 dB
→ Electric shutter: OFF, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/100000second)
→ Gamma: γ = 1
→ Frame on demand:
→ Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) VD reset mode
→ Trigger input: CameraLink (CC1) or DCIN/SYNC connector
→ Partial scan: Selectable start position and width of picture grabbing in 1H step.
→ Power supply voltage: 12 ± 1 VDC
→ Current consumption: Approx. 260 mA (Approx. 3.1W) *When partial scan is ON, Approx. 330 mA (Approx. 4.0W)
→ Ambient Performance: 0 to 40°C (+32 to +104 F), less than 90 % RH
→ Operation: -10 to 50°C (+14 to 122 F), less than 90 % RH
→ Storage: -20 to 60°C (-4 to 140 F), less than 70 % RH (without dew condensation)
→ Vibration endurance: 10 to 55 Hz (2.37 to 71.7 m/s2), sweep: 1 min XYZ 30min
→ Shock endurance: 490.3 m/s2 (Drop test, once each top, bottom, left and right)
→ External dimensions: 44 (W) x 44 (H) x 41 (D) mm (Not including protrusions)
→ Mass: Approx. 110 g
The Hitachi KPF500WCL is a a CameraLink output system progressive san black and white CCD camera with a 2/3-inch size CCD and a full frame shutter. The image of 2456 (H) x 2058 (V) is output at 16 frames per second. The square lattice pixel format also provides excellent suitability for image processing applications.
The Hitachi KP F500WCL comes in a 2/3-inch 5,000,000 pixels square lattice progressive scan CCD achieve a high resolution of 2456 (H) x 2058 (V). The camera has small SDR connector for digital outputs. Therefore, the camera has the realization of small-sized shape of 44(W) x 44(H) x 41(D) mm. The power supply through the camera link cable is possible from the PoCL frame grabber board. Because the power supply from the DCIN/SYNC connector is also possible, it is possible to make the camera work by using usual frame grabber board. The power supply from the DCIN/SYNC connector is given to priority when the power supply is supplied from both.
Similar Models:
KP-F145GV : GigE Vision Progressive Scan Industrial Camera
