Hitachi KP-FD30 VGA Progressive Scan CCD Color Camera

→ Imaging device: 1/2-inch progressive scan interline CCD
→ No. of effective pixels: 659(H) x 494(V)
→ Unit cell size: 9.9(H) x 9.9(V) m ( Square pixel )
→ Scanning area: 7.48(H) x 6.15(V) mm
→ Color filter: R, G, B primary color mosaic fi lters on chip
→ Scanning system (Selectable by switch): Progressive scan ( VGA mode ); 2:1 interlace scan ( NTSC mode )
→ Frequency: Horizontal: 31.468 kHz Vertical: 59.94 Hz
→ Sync system: Internal / external ( HD/VD auto selection )
→ Internal sync output: HD/VD/SYNC 2 Vp-p/75 , Negative polarity; WE: 5 Vp-p, Negative
→ External sync input: HD/VD 2 to 5 Vp-p, Negative polarity; EXT. Trigger input: Low 0 VDC, High 2 to 5 VDC
→ Video signal output: RGB output (G on SYNC); Y/C output ( Only at the NTSC mode ); VBS output ( Only at the NTSC mode)
→ Resolution ( Y signal at center ): Horizontal: 440 TV lines; Vertical: 480 TV lines ( VGA mode ) 350 TV lines ( NTSC mode )
→ Standard sensitivity: 2,000 lx ( F5.6, 100IRE )
→ Minimum illumination: 10 lx ( F1.4, AGC ON, 50IRE )
→ Sensitivity selection: Gain Adjustable at AGC OFF and AGC Limit Gain
→ Electric shutter speed: Selectable in 11 steps high spped shutter
→ PRESET: OFF(1/60), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/30000, 1/50000 second: Approx. 1H steps from 1/60 second to 1/10,000 second; Selectable in 27 steps low speed shutter OFF(1/60), 1/30, 1/15, 1/10, 1/7.5, 1/6, 1/5, 1/3.75, 1/3, 1/2.5, 1/2, 1/1.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 second
→ AES: From 1/60 second to approx. 1/50,000 second ( Response : SLOW, NORMAL, FAST )
→ VARIABLE: Approx. 1H steps from 1/60 second to 1/10,000 second
→ Auto level ontrol [ALC]: ( The auto level control system of AES, lens iris and AGC. ); AVERAGE / PEAK&AVERAGE / AREA ( Scanning area is selectable from 9 area. )
→ Auto-iris lens outputs [DC/VIDEO*]: DC ( Iris control voltage input type lens, cable length over 150mm ): Coupling coil impedance Damper : 1,150 ±10% , Drive : 190 ±10%
→ Power supply: 12 VDC, 60 mA
→ Note: "VIDEO" is optionally.
→ White balance: Selectable in 3 modes; Auto-tracking[ATW]:2,500K~6,000K; preset [AWC] : (2,500K~10,000K); R/B gain manual control [MANUAL] (2,500K~10,000K)
→ Text display: 24 alpha-numeric characters in one line
→ Picture adjustment: Modes and settings can be selected and adjusted from on-screen menu
→ Remote control: Modes and settings can be selected and adjusted from PC by RS-232C level
→ Power supply: 12 VDC ± 10 %; Approx.360 mA(KP-FD30) (Including 60mA for auto-iris lens )
→ Lens mount C/CS mount ( Frange-back adjustment )
→ Ambient temperature? Operating : -10 to 50°C, ( 14 to 122 °F) 30 to 80 %RH
→ Storage: -20 to 60°C(-4 to 144 °F), 20 to 90 %RH
→ Vibration endurance? 68.6 m/s² ( 10 to 200Hz, 30 minutes each on XYZ axes )
→ Shock endurance? 490 m/s² ( vertical, horizontal, once each face )
→ External dimensions: 58(W) x 58(H) x 48(D) ( not including lens and protrusions )
→ Mass: Approx.220g ( without lens )