Search

5 Megapixel Black & White Gigabit Ethernet Camera

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]
The Hitachi KPF500GV is single CCD type camera which utilized the progressive scan CCD image sensor with square pixel for VGA format of 2/3-inch. By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by using hub or switcher, construction of multiple camera system can be easily performed.

The Hitachi KP F500GV 2/3-inch 5,050,000 pixels square lattice progressive scan CCD achieve a high resolution of 2456(H) x 2058(V). High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. It is possible to 100m. Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed data transmit is available and suitable for image processing. Power supply can be input via Ethernet cable (Power over Ethernet).

Imaging device 2/3-inch progressive scan interline CCD
Total pixels 2536 (H) x 2068 (V)
Effective pixels 2456 (H) x 2058 (V)
Pixel size 3.45 um (H) x 3.45 um (V) (square lattice)
Scanning area 8.47 mm (H) x 7.10 mm (V)
Scanning system Progressive
Aspect ratio 5 : 4
Frame rate 16 frames per second (full pixel readout)
Sync system Internal / external
Lens mount C mount
Flange focal distance 17.526 mm
Video output - Interface Gigabit Ethernet
Protocol GigE Vision compliant
Transfer 1 Gbit per second
Image format Mono 8/10/12bit
Maximum image size 2448 (H) x 2050 (V)
Frame rate 16 frame per second *Frame rate is different for following format Mono 10/12bit: 11 frame per second
Sensitivity 400lx, F5.6, 3200K
Minimum illumination 1 lx (F1.4 GAIN MAX)
Electric shutter OFF / Auto (AES) / Manual (PRESET or VARIABLE). OFF is normal exposure (frame rate). PRESET 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. VARIABLE 10 to 1/100000 second
External trigger shutter - Mode Fixed shutter, One trigger, VD Sync, Reset control
Input Via Gigabit Ethernet cable (Software trigger)12-pin connector (dware trigger)
Input level 24Vp-p /- 1V
Threshold 3.7V /- 0.5V (Low --> High); 3.5V /- 0.5V (High --> Low)
Input polarity High / Low adjustable
Input delay Adjustable
External sync signal - VD output 5Vp-p /- 0.3V
Strobe out 5Vp-p /- 0.3V
Output Polarity High / Low adjustable
Strobe delay Adjustable
Strobe duration Adjustable
Partial scan Selectable start position and width of picture grabbing in 1H step.
ALC (Auto level control) Adjustable for video level
Gain Auto / Manual (0dB to 18db)
Gamma OFF (γ=1) / ON
V-Binning OFF / ON
Sharpness Adjustable
Black level Adjustable
Knee Adjustable (Knee point and Knee slope)
Power supply voltage DC 12V /- 1V (input from 12-pin connector) 48V (PoE)
Current consumption Approx. 6.0W (DC 12V)
Ambient Temperature - Performance 0 to 40°C ( 32 to 104 F), less than 90 % RH
Ambient Temperature - Operation -10 to 50°C ( 14 to 122 F), less than 90 % RH
Ambient Temperature - Storage -20 to 60°C (-4 to 140 F), less than 70 % RH (without dew condensation)
Vibration endurance 68.65 m/s2 or less (10 to 200Hz, 30 minutes each on XYZ axes) (Do not subject to strong vibration for long periods of time.)
Shock endurance 490.3 m/s2 or less (vertical, horizontal, once each face)
External dimensions 44(W) x 29(H) x 72(D) mm (not including lens and protrusions)
Mass Approx. 140g


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.