Search

0.33 Megapixel Black & White Mini Camera Link Industrial Camera

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]
The Hitachi KPF31SCL a CameraLink output system progressive scan black and white CCD camera with a 1/3-inch size CCD and a full fame shutter. The image of 659 (H) x 494 (V) is output at 120 frames per second. The square format picture elements provide suitability for image processing applications.

The Hitachi KP F31SCL features image of 659 (H) x 494 (V) active pixels is output in high-speed 120 frames per second. The camera has small SDR connector for digital outputs. Therefore, the camera has the realization of small-sized shape of 29 (W) x 29 (H) x 38 (D) mm. Power supply is input from DCIN connector.

Imaging device 1/3-inch interline CCD
Total pixels 692 (H) x 504 (V)
Effective pixels 659 (H) x 494 (V)
Pixel size 7.4 um (H) x 7.4 um (V) (square lattice)
Sensing area 4.88 mm (H) x 3.66 mm (V)
Scanning system Progressive
Aspect ratio 4 : 3
Frame rate 120 frames per second (full pixel readout); 219 frames per second (vertical 2 pixel addition)
Horizontal drive frequency 49.090902 MHz
Horizontal scanning frequency 62.937 kHz (full pixel readout); 57.618 kHz (vertical 2 pixel addition)
Vertical scanning frequency 119.88 Hz (full pixel readout); 219.08 Hz (vertical 2 pixel addition)
Sync system Internal
Lens mount C mount
Flange focal distance 17.526 mm
Video output Digital output (CameraLink); Base configuration: 24.545451 MHz x 2 TAP (Note: maximum cable length is 10 m); Output image size: 659 (H) x 494 (V) (full pixel readout)
Resolution Horizontal: 500 TV lines / Vertical: 490 TV lines
Sensitivity 550 lx, F4, 3200 K
Minimum illumination 8.6 lx (F1.4, MAX GAIN)
Signal noise to ratio 50 dB
Electric shutter OFF, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second)
Gamma γ = 1
Frame on demand (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode
Partial scan Selectable start position and width of picture grabbing in 1H step.
Power supply voltage 12 ± 1 VDC
Current consumption Approx. 190 mA (approx. 2.3 W) *MAX partial scan 1H: Approx. 230 mA (approx. 2.8W)
Ambient Performance 0 to 40 °C ( 32 to 104 F), less than 90 % RH
Operation -10 to 50 °C ( 14 to 122 F), less than 90 % RH
Storage -20 to 60 °C (-4 to 140 F), less than 70 % RH (without dew condensation)
Vibration endurance 98 m/s2 (Acceleration: constant); 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
Shock endurance 686 m/s2 (Drop test, once each top, bottom, left and right)
External dimensions 29 (W) x 29 (W) x 38 (D) mm (Not including protrusions)
Mass Approx. 50 g



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.