Call Now: 1-800-284-2288 |
(discontinued)High Sensitivity 2/3" Monochrome Progressive Scan CCD 1.4 MP Camera With NIR Capabilities |
|
This product has been discontinued as of March, 2019. For an alternative solution, please contact sales.
The CM-141MCL is a 1.4 megapixel monochrome CCD camera with Mini Camera Link interface. The camera features a high sensitivity CCD chip, high signal to noise ratio (> 58 dB), 30 fps in triggered mode and a compact house, making them particularly suitable for imaging applications in machine vision, medical imaging, food sorting, traffic and surveillance applications.
The CM141MCL is designed around the ICX285 2/3" progressive scan CCD (1392 x 1040 pixels). This sensor uses its 6.45 μm pixel size and improved microlens technology to provide higher overall sensitivity (as low as 0.03 lux) with low smear characteristics. It also features extended spectral response in the near-IR region offering roughly 4X the sensitivity of conventional sensors at a 945 nm wavelength. CM-141MCL camera run with 30 frames per second in triggered mode and continuous operation with full resolution. A variety of trigger modes are provided including reset continuous triggering (RCT) which enables the camera to operate in continuous mode while awaiting a trigger signal.
The CM-141MCL is available with a factory-installed Right Angle Adapter. The adapter enables the camera to "look" at a 90 degree angle and is designed for a range of inspection tasks where physical access on production lines is limited.
→ High sensitivity 2/3" monochrome progressive scan CCD with NIR capabilities
→ C3 Compact series
→ 1392 (h) x 1040 (v) active pixels
→ 6.45 micro m square pixels
→ 30 frames/second triggered and continuous operation with full resolution
→ Up to 141 frames/second with variable partial scan
→ 50 frames/second with vertical binning
→ Shutter speed from 63 micro s to 2 sec. using Pulse Width Control
→ Preset shutter from OFF (1/30) t0 1/10,000
→ Programmable exposure from 63 micro s to 33ms
→ Fine Exposure from 1/15847s to 1/85149s by 1 pixel clock unit
→ Pre-select, Pulse width and reset continuous trigger modes
→ Smearless EPS mode available
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ 8, 10 or 12-bit output
→ Setup by Windows 2000/XP via serial communication
→ Mini Camera Link interface (Power over Camera Link also available)
→ Right angle option available
Sensor, CM-141 MCL | Sony ICX-285AL 2/3" progressive scan CCD |
Pixel Clock | 58 MHz |
Frame rate full frame | 30.12 frames/second |
Active area | 8.98 (h) x 6.7 (v) mm 2/3" diagonal |
Cell size | 6.45 (h) x 6.45 (v) micro m |
Active pixels | 1392 (h) x 1040 (v) |
Read-out modes, Full scan | 1392 (h) x 1040 (v) 30.12 fps |
Read-out modes, 2/3 partial scan | 1392 (h) x 694 (v) 41.05 fps |
Read-out modes, 1/2 partial scan | 1392 (h) x 520 (v) 50.06 fps |
Read-out modes, 1/4 partial scan | 1392 (h) x 260 (v) 74.57 fps |
Read-out modes, 1/8 partial scan | 1392 (h) x 130 (v) 98.73 fps |
Read-out modes, Vertical binning | (CM-141 MCL only) 1392 (h) x 520 (v) 50.18 fps |
Read-out modes, Variable Partical scan - Start | line from 1 to 1024 |
Read-out modes, Variable Partical scan - High | from 8 to 1032 (Lines) |
Sensitivity | (CM-141 MCL) 0.03 Lux (On sensor, Max. gain, shutter off, 50% video) |
S/N ratio | >58dB (0 dB gain) |
Video output | 8, 10 or 12 bit in Mini-CL |
Auto-iris lens video | 0.7V p-p |
Gain | -6dB to 24dB |
Synchronization | Int. X-tal or ext. trigger |
Inputs, Camera Link | Ext. trigger, LVDS (CC 1) |
Inputs, TTL | Ext. trigger 4V ±2V |
Outputs, Camera Link | Clk., FVAL, LVAL, Data, EEN |
Outputs, TTL | XEEN |
Trigger modes | Edge pre-select, Pulse Width, RCT, Smearless EPS |
Electronic shutter, Pre-set shutter speed | 1/30 to 1/10,000 in 10 steps |
Electronic shutter, Programmable exposure | 2L (63 micro s) to 1052L (33.19ms) in 1L steps |
Electronic shutter, Pulse Width Control | 63 micro s to 2 sec. |
Electronic shutter, Fine Exposure | 1/15847s to 1/85149s (in 1 pixel clock unit) |
Accumulation | Auto-detect LVAL-synchr. / asynchr. |
Control interface | Mini-CL serial communication |
Functions controlled by serial communication | Shutter, Trigger mode, Readout mode, Trigger Polarity, Black level, Gain, |
Indicators on rear panel | LED for power and trigger input |
Operating Temperature | -5°C to 50°C |
Humidity (operation) | 20% - 90% non-condensing |
Storage temp./humidity | -25°C to 60°C / 20%-90% non-condensing |
Vibration | 10G (20Hz to 200 Hz XYZ) |
Shock | 70G |
Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
Power | 12V DC ±10% 5.1 W |
Lens mount | C-mount |
Dimensions | (H x W x L) 29 x 44 x 75 mm (standard Mono/Color) 29 x 44 x 93.5 mm (with Right Angle) |
Weight | 130 g (CM/CB-141 MCL) 160 g (CM/CB-141 MCL-RA with Right Angle) |
cmcb141mcl.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|