CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/3" Monochrome Interlaced Scan Camera, EIA (RS-170) Video Standard

The JAI CV-A60E has the compact footprint of merely 44 x 66 mm (width x length) with a height of 29 mm.

The CV A60E offers S/N ratio >58dB, excellent sensitivity and smear performance. RS 232C control of all settings. Sevaral trigger modes including edge pre-select and pulse width control.

The target market for the CVA60E camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).

→ New compact size 1/2" and 1/3" monochrome CCD cameras
→ Improved sensitivity, dynamic range and smear performance
→ High S/N ratio up to 60 dB
→ Extended range of functions and options compared with CV-M50
→ Shutter speeds from Off to 1/10,000 sec.
→ Programmable exposure
→ Interlaced or non-interlaced scanning. Field or frame accumulation
→ Internal, external HD/VD or random trigger synchronization
→ Edge pre-select, pulse width control, start/stop trigger modes
→ Long time exposure with external VD pulse interval
→ Frame-delay read out in connection with pulse width controlled shutter
→ Exposure enable EEN, write enable WEN and pixel clock output
→ Short ASCII commands for fast mode setup via serial port
→ Setup by Windows 95/98/NT software via RS 232C
→ Resolution horizontal 570 TV lines
→ Video output Composite VS signal, 1.0 Vpp, 75 Ω
→ Gamma 0.45 or 1.0

EIA 768 (h) x 494 (v) pixels, CCIR: 752 (h) x 582 (v) pixels
Scanning system, EIA 525 lines 30/frames sec
CCD sensor CV-A60 Monochrome 1/3" IT CCD
Sensing area, CV-A60 4.9 (h) x 3.7 (v) mm
Effective pixels, EIA 768 (h) x 494 (v)
Pixels in video output, EIA 758 (h) x 486 (v)
Cell size, CV-A60, EIA 6.35 (h) x 7.4 (v) μm
Sensitivity on sensor, CV-A60 0.05 Lux, Max gain, 50% video
S/N ratio, CV-A60, EIA 59 dB
Gain Manual - Automatic
Gain range 0 to 15 dB
Accumulation Field-Frame
Synchronization Int. X-tal. Ext HD/VD or random trigger
Scanning 2:1 interlaced, non-interlaced
HD sync. input/output 4 V, 75 Ω
Trigger input 4 V, 75 Ω
WEN output (write enable) 4 V, 75 Ω
EEN out. (exposure enable) 4 V, 75 Ω
Pixel clock output 4 V, 75 Ω
Shutter (off), 1/100, 1/250, 1/500, 1/1,000, 1/2000, 1/4000, 1/10,000 sec.
Pulse width control 1.5 H to 1000 H
Start/stop, EIA 1/60 to 1/10,000 sec.
Long time exposure 1 field to ∞
Programmable exposure 2.5 H to 252.5 H
Frame delay readout Time from PWC trigger input to ext. VD input
Functions controlled by RS-232C Scanning format, Trigger mode,Shutter speed, Trigger/WEN polarity, Accumulation, Shutter mode, Programmable exposure, AGC level, White clip, Setup, Manual gain, AGC/manual gain, Internal/potentiometergain set, Gamma, Pixel clock, Commands and internal adjustments
Functions controlled by DIP switches VD input/output, HD input/output, internal HD and VD 75 Ω termination on/off
Operating temperature -5°C to 45°C
Humidity 20 - 80% non-condensing
Storage temp./humidity -25°C to 60°C/20% - 90%
Power 12V DC ±10% 1.5 W
Lens mount C-mount
Dimensions 29 x 44 x 66 mm (HxWxD)
Weight 150 g


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.